Product ID:MIL-I-24453,INHIBITOR,CORROSION,SOLUBLE-OIL
MSDS Date:01/01/1987
FSC:6850
NIIN:00-139-5318
MSDS Number: BDBLL

OCTAGON PROCESS,INC.

Emergency Phone: 201-945-9400

Cage: DO973

OCTAGON PROCESS,INC.

EDGEWATER, NJ 07020-1105 US

Telephone: 201-945-9400

Cage: DO973

PETROLEUM HYDROCARBON

ACGIH TLV: 5MG/CUM (MIST)

ADDITIVES

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: <5.0%

Effects of Overexposure:PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE
MILD SKIN IRRITATION

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:330F/166C COC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE, WATER FOG OR
SPRAY
Fire Fighting Procedures:USE WATER SPRAY TO COOL CONT, KNOCK-DOWN
VAPORS. WEAR SCBA.
Unusual Fire/Explosion Hazard:DO NOT MIX OR STORE W STRONG OXIDANTS
SUCH AS LIQUID CHLORINE OR CONCENTRATED OXYGEN.

Spill Release Procedures:RECOVER FREE LIQUID.ADD ABSORBENT TO SPILL
AREA. KEEP OUT OF SEWERS & WATER COUSRES BY DIKING OR COMPOUNDING

Handling and Storage Precautions:KEEP CONTAINERS CLOSED.DO NOT
HANDLE,STORE NEAR IGNITION SOURCES.NO CONTAMINATION SITH FOREIGN
MATERIALS.PROVIDE BAFFLES ON MACHINES,TO MINIMIZE MISTS
Other Precautions:AVOID BREATHING OIL MIST. REMOVE OIL-SOAKED CLOTHING
& LAUNDER BEFORE RE-USE.DISCARD OIL-SOAKED SHOES. WASH SKIN
THOROUGHLY WITH SOAP & WATER AFTER HANDLING.

Respiratory Protection:USE SUPPLD AIR RESPIR IN CONFINED SPACE,NORMALLY
NOT NEEDED.
Ventilation:LOCAL EXHAUST TO ELIMINATE MISTS/FUMES/GASES.
Protective Gloves:CHEM. RESISTANT
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:USE IMPERVIOUS APRON & CLOTHES TO PREVENT
REPEATED CONTACT.
Supplemental Safety and Health
OCTAGON'S MSDS NOT DATED; SPEC REF: MIL-I-24453(SHIPS).

HCC:N1
Boiling Pt:B.P. Text:528-885F
Vapor Pres:<1
Vapor Density:>12
Spec Gravity:0.90
Evaporation Rate & Reference:<0.01(BUTYL ACE=1)
Solubility in Water:EMULSIFIES
Appearance and Odor:CLEAR, DARK AMBER COLOR. SLIGHT PETROLEUM ODOR
Percent Volatiles by Volume:NEG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS (LIQ.CHLORINE, CONC. OXYGEN, SODIUM,ETC)
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:FUMES,SMOKE, CARBON MONOXIDE, & SULFUR
OXIDES

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE DISPOSAL
REGULATIONS. DISPOSE OF ABSORBED MATERIAL AT AN APPROVED WASTE
DISPOSAL SITE OR FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.