Product ID:ENAMEL, RED, 11136
MSDS Date:01/08/1987
FSC:8010
NIIN:00-141-2952
MSDS Number: BDBNK

PLASTI-KOTE COMPANY, INC.

1000 LAKE RD.
MEDINA, OH 44256
US

Emergency Phone: 216-725-4511

Info Phone: 216-725-4511

Cage: DO534

TEMPO PRODUCTS CO A PLASTI-KOTE CO INC

MEDINA, OH 44256 US

Telephone: 330-725-4511

Cage: 07708

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 22-27%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LACOLENE (ALIPHATIC HYDROCARBON)

CAS: 64742-89-8

Fraction By Weight: 17-23%

OSHA PEL 200 PPM

ACGIH TLV: 500 PPM/350 MG/M3

NAPHTA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EXCESSIVE INHAL OF VAPORS CAN CAUSE
NASAL & RESPIRATORY IRRITATION. CAN CAUSE IRRITATION, BLURRED
VISION TO EYES. SWALLOWING-CAN CAUSE NAUSEA, VOMITING, DIARRHEA &
GASTROINTESTINAL IRRITATION. SKIN CO NTACT W/METHYLENE CHLORIDE IS
PAINFUL AND IRRITATING IF CONFINED TO SKIN BY GLOVES, CLOTHING,
ETC.
Effects of Overexposure:EXCESSIVE INHAL CAN CAUSE WEAKNESS, FATIGUE,
HEADACHE, LOSS OF CONSCIOUSNESS. CAN CAUSE REDNESS & TEARING OF
EYES. REPEATED & PROLONGED OVEREXPOSURE TO SOLVENTS MAY CAUSE BRAIN
& NERVOUS SYSTEM DAMAGE . PROLONGED OR REPEATED SKIN CONTACT
W/METHYLENE CHLORIDE MAY CAUSE IRRITATION, DEFATTING AND
DERMATITIS.
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY
AND/OR SKIN REACTION.

First Aid:IF BREATHED-REMOVE INDIVIDUAL TO FRESH AIR, IF BREATHING IS
STOPPED GIVE ARTIFICIAL RESPIRATION, SEEK MEDICAL HELP. IF IN EYES
FLUSH W/WATER 15 MIN. IF SWALLOWED DO NOT INDUCE VOMITING. KEEP
PERSON WA RM, QUITE AND GET MEDICAL ATTENTION/POISON CONTROL
CENTER. IF ON SKIN-WASH WITH SOAP AND WATER/HAND CLEANERS. WASH
CLOTHING BEFORE RE-USE.

Flash Point:0F/-18C
Lower Limits:1.0
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WATER MAY BE USED TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILD-UP AND POSSIBLE AUTOIGNITION OR EXPLOSION
WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE, VAPORS ARE
HEAVIER THAN AIR AND MAY TRAVEL ALONG THE GROUND AND MAY BE IGNITED
BY PILOT LIGHTS, OTHER FLAMES, SPARKS, HEATERS.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. EVACUATE AREA,
VENTILATE & AVOID BREATHING VAPORS. ABSORB LIQUID ON PAPER,
VERMICULITE OR OTHER ABSORBENT MATERIAL AND TRANSFER TO CLOSED
CONTAINERS. TURN OFF HEAT & AI R CONDITIONING TO PREVENT VAPOR
CONTAMINATION.

Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 120F OR IN
DIRECT SUNLIGHT OR NEAR HEAT OR OPEN FLAMES. DO NOT PUNCTURE OR
INCINERATE.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS PROTECTED FOR
STORAGE OF NFPA/OSHA CLASS 1A FLAMMABLE LIQUIDS.

Respiratory Protection:AVOID BREATHING VAPORS OR SPRAY MIST. OPEN DOORS
& WINDOWS FOR FRESH AIR. AN ORGANIC TYPE RESPIRATOR IS ADVISED
WHERE VAPOR CONCENTRATION IS GREATER THAN 100 PPM.
Ventilation:DO NOT USE IN CONFINED OR CLOSED SPACE. PROVIDE SUFFICIENT
MECHANICAL/LOCAL EXHAUST VENTILATION TO PREVENT EXPOSURE.
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL SPLASH GOGGLES/IN ACCORD W/OSHA
Other Protective Equipment:SOLVENT-RESISTANT BOOTS, APRON, HEADGEAR
AND/OR FACESHIELD WHERE SPLASHING IS POSSIBLE.
Work Hygienic Practices:WASH HANDS BEFORE EATING. MINIMIZE PERSONAL
CONTACT AND/OR BREATHING OF VAPORS.
Supplemental Safety and Health

HCC:V3
Boiling Pt:B.P. Text:104-281F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT.
Percent Volatiles by Volume:85.90

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, HEAT, ALKALIES, HOT SURFACES AND REACTIVE
METALS.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME
Hazardous Decomposition Products:MAY FORM TOXIC MATLS, NITROGEN
COMPOUNDS, ETC., CARBON DIOXIDE, CARBON MONOXIDE, HYDROGEN
CHLORIDE, PHOSGENE WHEN BURNED

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATL MAY BE
DEPOSITED IN A TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH LOCAL,
STATE AND FED REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.