Product ID:KRYLON INTERIOR/EXTER ENAMEL AEROSOL 1901
MSDS Date:01/01/1985
FSC:8010
NIIN:00-141-2956
MSDS Number: BDBNY

BORDEN INC.,KRYLON DEPARTMENT

630 E WASHINGTON
NORRISTOWN, PA 19404
US

Cage: KO164

KRYLON PRODUCTS

SOLON, OH 44139 US

Telephone: 800-832-2541/216-566-2917

Cage: 87187

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 25%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 15%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192

METHYL ISOBUTYL KETONE (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 10%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5 - 10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)

CAS: 111-15-9

RTECS: KK8225000

Fraction By Weight: 3%

OSHA PEL S,100 PPM

ACGIH TLV: S, 5 PPM; 9192

Effects of Overexposure:DIZZY,CONFUSION,WEAKNESS

First Aid:INHALATION:REMOVE TO FRESH AIR.IF SPRAYED IN EYES,WASH WITH
WATER 15 MINUTES.SEE A PHYSICIAN.

Extinguishing Media:CO,CO2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:WATER FOG TO COOL CANS TO PREVENT EXPOSURE TO
HIGH TEMPS
Unusual Fire/Explosion Hazard:FLAME FRONT IF SPRAYED DIRECTLY AT A OPEN
FLAME.CANS MAY BURST WITH VIOLENCE WHEN EXPOSED TO HEAT

Spill Release Procedures:REMOVE SOURCES OF IGNITION SOAK UP WITH
ABSORBENT MATERIAL.VENTILATE AREA.

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURE OVER
120F.AVOID RADIATORS,STOVES,DIRECT SUNLIGHT OR OTHER HEAT
SOURCE.HIGH TEMP MAY CAUSE BURSTING.
Other Precautions:AVOID PUNCTURING IF SPRAY IS BURNED DO NOT BREATH
IRRITATING OR TOXIC FUMES.

Respiratory Protection:NOT REQUIRED WITH ADEQUAT VENTILATION
Ventilation:SUPPLEMENT NATURAL VENTILATION AS NEEDED
Eye Protection:DESIRABLE
Supplemental Safety and Health
ADD HAZ ING:PIGMENTS 0.4-8%,CELLULOSE NITRATE,ALCOHOL-ALKYD,DIOCTYL
PHTHALATE 16%,BUTANOL 3%,METHYLENE CHLORIDE 10%,METHYL ETHYL KETONE
5%.PERCENTAGES OF INGREDIENTS ARE APPROXIMATE

HCC:V3
Vapor Density:>1
Spec Gravity:<1
Evaporation Rate & Reference:BUTYL ACETATE >1
Solubility in Water:SLIGHT
Percent Volatiles by Volume:80

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:BURNING SPRAY MAY PRODUCE TOXIC AND
IRRITATING COMPOUNDS

Waste Disposal Methods:AVOID INCINERATION OF CAN OR USE ONLY A STRONG
CLOSED INCINERATOR.DRIED ENAMEL DISCARD AS NON-DANGEROUS TRASH TO
BE BURIED OR BURNED IN ACCORDANCE WITH STATE,FEDERAL AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.