BDBRX - SS-4004 SILICONE PRIMER
- MSDS: BDBRX
- Manufacturer: GENERAL ELECTRIC CO SILICONE PRODUCT DIV
- Product Name: SS-4004 SILICONE PRIMER
- National Stock Number: 8030-00-142-9128
Product Identification
Product ID:SS-4004 SILICONE PRIMER
MSDS Date:01/01/1985
FSC:8030
NIIN:00-142-9128
Kit Part:Y
MSDS Number: BDBRX
Responsible Party
WATERFORD, NY 12188
US
Emergency Phone: 518-237-3330
Info Phone: 518-237-3330/FAX 518-233-3795
Cage: 01139
Contractor
Telephone: 518-237-3330/800-332-3390
Cage: 01139
Ingredients
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 12.0%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 30.0%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 25.0%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 12.0%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHYL SILICATE
CAS: 78-10-4
RTECS: VV9450000
Fraction By Weight: <5.0%
OSHA PEL 100 PPM
ACGIH TLV: 10 PPM; 9293
Hazards
Effects of Overexposure:EYE IRRIT, DRYING OF SKIN. EXCESSIVE INHALATION
CAUSES HEADACHE, DIZZINESS & NAUSEA.
First Aid
First Aid:EYE:FLUSH W/WATER FOR 15 MIN, SEE DOCTOR. SKIN:WASH
THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR &
RESUSSCITATE IF NECESSARY.
Fire Fighting
Flash Point:56F TCC
Extinguishing Media:WATER MAY BE INEFFECTIVE, ALCOHOL FOAM RECOMMENDED
(NFPA).
Unusual Fire/Explosion Hazard:VAPORS HAVE A LOW FLASH POINT & MAY FORM
EXPLOS8IVE MIXTURE IN AIR.
Accidental Release
Spill Release Procedures:EXTINGUISH SOURCES OF IGNITION. ABSORB IN
INERT MATERIAL & PLACE IN METAL CONTANER FOR DISPOSAL. VENTILATE
AREA THOROUGHLY WHILE CLEANING UP SPILLS.
Handling
Handling and Storage Precautions:STORE AWAY FROM HEAT, SPARKS & OPEN
FLAME IN A COOL PLACE.
Exposure Controls
Respiratory Protection:NOT REQ D UNLESS NORMAL VENTILATION IS
INADEQUATE.
Ventilation:LOCAL:ADEQUATE TO REMOVE VAPORS MECH: EXPLOSION PROOF.
Protective Gloves:NOT NEEDED NORM
Eye Protection:SAFETY GLASSES.
Supplemental Safety and Health
PHYSICAL DATA;VAPOR PRESSURE IS SIGNIFICANT AT ROOM TEMP;SPECIFIC
GRAVITY IS 0.8-0J.9;VAPOR DENSITY IS 2-3. MFG GIVES TLV AS 100 PPM
(COMBINED SOLV). PART C OF A THREE PART KIT.KEY1:J1.
Chemical Properties
HCC:F2
Evaporation Rate & Reference:APPROX 1.0 (BUAC)
Appearance and Odor:BRIGHT PINK LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:79.0
Stability
Stability Indicator/Materials to Avoid:YES
FLAMMABLE, KEEP AWAY FROM HEAT, SPARKS OR OPEN FLAME.
Hazardous Decomposition Products:CO,CO*2, SIO*2 FROM COMB
Disposal
Waste Disposal Methods:INCINERATE OR DISPOSE OF AS SCRAP SOLVENT
ACCORDING TO ENVIRONMETAL REGLATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.