BFBDQ - E11018-M
- MSDS: BFBDQ
- Manufacturer: TELEDYNE MCKAY
- Product Name: E11018-M
- National Stock Number: 3439-00-486-8262
Product Identification
Product ID:E11018-M
MSDS Date:01/01/1987
FSC:3439
NIIN:00-486-8262
MSDS Number: BFBDQ
Responsible Party
Emergency Phone: 717-845-7581
Cage: 76254
Contractor
Telephone: 513-332-5706
Cage: 76254
Ingredients
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: BAL
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
NICKEL (SARA III)
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 1.6%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
MANGANESE (SARA III)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 1.5%
OSHA PEL (C) 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9293
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 0.4%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
MOLYBDENUM
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 0.4%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9293
Hazards
Effects of Overexposure:MAJOR ROUTE OF ENTRY IS INHALATION:ALLERGIC
PROB,LUNG RELATED PROB.
First Aid
First Aid:REMOVE FROM EXPOSURE & OBTAIN PROMPT MEDICAL ATTN.IF VICTIM
IS UNCONSCIOUS,ADMINISTER OXYGEN.IF NOT BREATHING,RESUSCITATE
IMMEDIATELY.
Fire Fighting
Extinguishing Media:NONE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:THE WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLE & FLAMMABLE MATL.
Accidental Release
Spill Release Procedures:NORMAL PROCEDURE.
Handling
Handling and Storage Precautions:NONE
Exposure Controls
Respiratory Protection:FUME RESPIRATOR
Ventilation:ADEQUATE VENTILATION
Protective Gloves:YES
Eye Protection:FACE SHIELD
Supplemental Safety and Health
MSDS DATED 11/85.
Chemical Properties
HCC:N1
Appearance and Odor:SOLID WIRE OR ROD.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:DIFFICULT TO DETERMINE,VARIES GREATLY.
Disposal
Waste Disposal Methods:DISPOSE OF FUME OR FLUX OR WELDING GRINDING
RESIDUES FROM THE WORK AREA OR FROM-FILTERS IN ACCORDANCE WITH EPA
OR LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.