BFBKZ - DUSTER ASSEMBLY TX600

  • MSDS: BFBKZ
  • Manufacturer: TEXWIPE CO
  • Product Name: DUSTER ASSEMBLY TX600
  • National Stock Number: 6830-00-495-8614
Product Identification

Product ID:DUSTER ASSEMBLY TX600
MSDS Date:01/01/1987
FSC:6830
NIIN:00-495-8614
MSDS Number: BFBKZ

Responsible Party
TEXWIPE CO.
650 E CRESENT AVE
UPPER SADDLE RIVER, NJ 07458-1827
US

Emergency Phone: NONE

Cage: FO826

Contractor
TEXWIPE CO.
308 UPPER SADDLE RIVER, NJ 07458 US

Telephone: (201) 327-9100

Cage: FO826

Ingredients

DICHLORODIFLUOROMETHANE (SARA III)

CAS: 75-71-8

RTECS: PA8200000

Fraction By Weight: 100%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:SKIN,EYE CONTACT MAY CAUSE FROSTBITE.
INHAL:DIZZINESS,ASPHYXIA;HIGH CONC-MINOR CARDIAC ARRYTHMIA

First Aid

First Aid:EYE,SKIN: TREAT FOR FROSTBITE,CONTACT PHYSICIAN. INHAL:REMOVE
TO FRESH AIR,GIVE CPR IF NOT BREATHING,DO NOT GIVE
EPINEPHRINE,CONSULT PHYSICIAN.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Fire Fighting Procedures:WEAR SCBA, WATER SPRAY TO COOL CONTR. MOVE CYL
W/O RISK.
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE IN HEAT OF
FIRE.TOXIC GAS MAY EXCAPE DURING FIRE.

Accidental Release

Spill Release Procedures:VENTILATE AREA,ESPECIALLY LOW AREAS WHERE
HEAVY VAPORS MAY COLLECT. REMOVE OPEN FLAMES.

Handling

Handling and Storage Precautions:STORE IN COOL (UNDER 120F),DRY WELL
VENTILATED PLACE, AWAY FROM OPEN FLAMES.

Exposure Controls

Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:OPTIONAL
Eye Protection:SAFETY/CHEM GOGGLES
Supplemental Safety and Health
MSDS UNDATED -RECD 29JULY87 REFILL SEE NSN 6830-01-038-4517

Chemical Properties

HCC:V2
Boiling Pt:B.P. Text:-22F/-30C
Spec Gravity:1.31
Appearance and Odor:COLORLESS LIQUID, SLIGHTLY ETHERAL ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
ALKALI AND ALKALINE EARTH METALS;POWDERED AL,ZN,BE,ETC.
Stability Condition to Avoid:OPEN FLAMES AND HIGH TEMPERATURES
Hazardous Decomposition Products:HCL,HF,CARBONYL HALIDES

Disposal

Waste Disposal Methods:EXHAUST AEROSOL CAN TO ATMOSPHERE IN AREA WHERE
TLV WILL NOT BE EXCEEDED

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.