BFCDC - ADHESIVE
- MSDS: BFCDC
- Manufacturer: TRANSWORLD ADHESIVE AND CHEM CORP
- Product Name: ADHESIVE
- National Stock Number: 8040-00-515-2246
Product Identification
Product ID:ADHESIVE
MSDS Date:01/01/1987
FSC:8040
NIIN:00-515-2246
MSDS Number: BFCDC
Responsible Party
Emergency Phone: 617-878-7015
Cage: 59888
Contractor
Cage: 59888
Ingredients
HEXANE (N-HEXANE)
CAS: 110-54-3
RTECS: MN9275000
OSHA PEL 500 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:EYE,THROAT,SKIN,LUNG IRRITANT
First Aid
First Aid:SKIN:WASH WITH WATER. EYES:FLUSH WITH WATER. INHAL:MOVE TO
FRESH AIR.GIVE ARTIF.RESP.IF NEEDED. REMOVE CONTAMINATED
CLOTHING.DO NOT INDUCE VOMIT.
Fire Fighting
Flash Point:<0F,-18C
Lower Limits:1.1
Upper Limits:7.5
Extinguishing Media:FOAM,DRY CHEM.,FOG,CARBON DIOXIDE
Unusual Fire/Explosion Hazard:AVOID FIRE,HEAT,SPARKS,IGNITION
SOURCES,STORAGE IN DIRECT SUNLIGHT
Accidental Release
Spill Release Procedures:VENTILATE AREA MECHANICALLY,KEEP FROM
FLAME,FIRE,SPARKS,IGNITION SOURCES;DO NOT BREATHE VAPORS;CLEAN UP
WITH ABSORBENT MATERIAL
Handling
Handling and Storage Precautions:KEEP FROM HEAT,SPARKS,FIRE,LIGHT;AVOID
PROLONGED SKIN CONTACT;STORE CONTAINERS CLOSED AND UPRIGHT
Exposure Controls
Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS
Ventilation:LOCAL,MECHANICAL
Protective Gloves:RUBBER
Eye Protection:SAFETY WITH SIDE SHIELDS
Other Protective Equipment:APRON,BARRIER CREAM.
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:150F,66C
Spec Gravity:.861
Evaporation Rate & Reference:>BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER,MILD ODOR.
Percent Volatiles by Volume:75
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEATS,SPARKS
Hazardous Decomposition Products:CO
Disposal
Waste Disposal Methods:IN COMPLIANCE WITH LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.