Product ID:KRYLON CRYSTAL CLEAR SPRAY 1303 (OLD FORM)
MSDS Date:01/01/1987
FSC:8010
NIIN:00-515-2487
MSDS Number: BFCFG

BORDEN INC., KRYLON DEPARTMENT

630 E WASHINGTON
NORRISTOWN, PA 19404
US

Cage: EO688

KRYLON PRODUCTS

SOLON, OH 44139 US

Telephone: 800-832-2541/216-566-2917

Cage: 87187

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 30%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 25%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

HEXANE (N-HEXANE)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 19%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 18%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192

NAPHTA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 2%

OSHA PEL 100 PPM

Effects of Overexposure:DIZZY,CONFUSION, WEAKNESS.

First Aid:INHALATION:REMOVE TO FRESH AIR. IF SPRAYED IN EYES, WASH WITH
WATER 15 MINUTES.

Extinguishing Media:CO,CO2,FOAM, DRY CHEMICAL
Fire Fighting Procedures:WATER FOG TO COOL CAN TO PREVENT EXPOSURE TO
HIGH TEMPS.
Unusual Fire/Explosion Hazard:FLAME FRONT IF SPRAYED DIRECTLY AT A OPEN
FLAME. CAN MAY BURST WITH VIOLENCE WHEN EXPOSED TO HEAT.

Spill Release Procedures:REMOVE SOURCES OF IGNITION SOAK UP WITH
ABSORBENT MATERIAL VENTILATE AREA.

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURE OVER 120F.
AVOID RADIATORS, STOVES, DIRECT SUNLIGHT OR OTHER HEAT SOURCE.HIGH
TEMP MAY CAUSE BURSTING.
Other Precautions:AVOID PUNCTURING IF SPAY IS BURNED DO NOT BREATH
IRRITATING OR TOXIC FUMES.

Respiratory Protection:NOT REQUIRED WITH ADEQUATE VENTILATION
Ventilation:SUPPLEMENT NATURAL VENTILATION AS NEEDED
Eye Protection:DESIRABLE
Supplemental Safety and Health
ACRYLIC ESTER RESIN COMPRISE 6.3% OF HAZARDOUS INGREDIENTS. MFR PHONE
#:614-294-7447. PKG 16 OZ CAN GENERAL PURPOSE COATING.

HCC:V3
Vapor Density:>1
Spec Gravity:<1
Evaporation Rate & Reference:BUTYL ACETATE >1
Solubility in Water:SLIGHT
Percent Volatiles by Volume:94

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:BURNING SPRAY MAY PRODUCE TOXIC AND
IRRITATING COMPOUNDS

Waste Disposal Methods:AVOID INCINERATION F CAN OR USE ONLY A STRONG
CLOSED INCINERATOR. DRIED LACQUER DISCARD AS NON-DANGEROUS TRASH TO
BE BURIED OR BURNED IN ACCORDANCE WITH STATE,FEDERAL AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.