BFCHC - EPOXO 2000XA,WHITE,27886,PART B
- MSDS: BFCHC
- Manufacturer: AMERICAN ABRASIVE METALS CO
- Product Name: EPOXO 2000XA,WHITE,27886,PART B
- National Stock Number: 5610-00-516-0056
Product Identification
Product ID:EPOXO 2000XA,WHITE,27886,PART B
MSDS Date:01/01/1987
FSC:5610
NIIN:00-516-0056
Kit Part:Y
MSDS Number: BFCHC
Responsible Party
IRVINGTON, NJ 07111-4607
US
Cage: 88444
Contractor
Telephone: 973-403-2600
Cage: 88444
Ingredients
POLYAMIDE RESIN BLEND CAS# N/R
TETRAETHYLENE PENTAMINE CAS# 112-57-2
CAS: 112-57-2
RTECS: KH8585000
Fraction By Weight: 3-5%
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:INHAL:DIZZ,UNCON.SKIN:IRRIT.EYE:IRRIT,DAMAGE.
First Aid
First Aid:EYE:FLUSH W/ LG AMT OF WATER.CALL MD.INHAL:FRESH
AIR,O*2,ARTIF RESPIR.SKIN:WASH W/ SOAP & WATER.INGEST:DO NOT INDUCE
VOMITING.CALL MD.
Fire Fighting
Flash Point:100F,38C PMCC
Lower Limits:1.4
Upper Limits:11.2
Extinguishing Media:CHEMICAL FOAM OR DRY CHEMICAL
Fire Fighting Procedures:USE SCBA W/ FULL FACE PIECE
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL ALONG GROUND TO
IGNITION SOURCES.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES
(FLAMES,FLARES,PILOT LIGHTS,ELECTRICAL SPARKS).ABSORB ON SAND,CLAY
OR OTHER ABSORBENT MATERIAL AND SHOVEL INTO CONTAINERS.
Handling
Handling and Storage Precautions:DO NOT GET INTO EYES.AVOID CONTACT W/
SKIN & CLOTHING.AVOID INHAL OF VAP/MIST.USE W/ ADEQUATE VENT.WASH
AFTER HANDLING.REMOVE.WASH CONTAM CLOTHING.
Other Precautions:AVOID EXTREME HEAT.DO NOT EXCEED 110F IN STORAGE
AREA.KEEP AWAY FROM FLAME.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED SCBA IF EXCEED TLV
Ventilation:LOCAL EXHAUST,MECHANICAL VENT TO KEEP BELOW TLV
Protective Gloves:RUBBER,BUNAN
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING
Supplemental Safety and Health
MSDS PREP: 86302. PART B OF A 2-PART KIT. ITEM IS TYPE 2 SPEC.
KEY1:F4.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:243F,117C
Vapor Pres:5
Vapor Density:2.6
Spec Gravity:0.97
Evaporation Rate & Reference:0.7(BUAC=1)
Solubility in Water:MODERATE
Appearance and Odor:VISCOUS LIQUID,AMINE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACID,OXIDIZING AGENTS.
Hazardous Decomposition Products:CO,CO*2,TOXIC FUMES WHEN BURNING,NO*X
Disposal
Waste Disposal Methods:DISPOSE BY CONTROLLED BURNING OR AUTHORIZED
LANDFILL IN ACCORDANCE W/ LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.