BFCJB - PR-1436-AS
- MSDS: BFCJB
- Manufacturer: PRODUCTS RESEARCH AND CHEMICAL CORP
- Product Name: PR-1436-AS
- National Stock Number: 8030-00-518-3440
Product Identification
Product ID:PR-1436-AS
MSDS Date:01/01/1985
FSC:8030
NIIN:00-518-3440
Kit Part:Y
MSDS Number: BFCJB
Responsible Party
GLENDALE, CA 91209
US
Emergency Phone: 818-240-2060
Info Phone: 818-240-2060
Cage: DO563
Contractor
Telephone: 818-240-2060
Cage: DO563
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
Effects of Overexposure:SKIN IRRTNT.ACCELERATOR CONTAINS A CHROMATE
WHICH MAY BE ABSORBED THROUGH THE SKIN.
First Aid
First Aid:SKIN:WASH THOROUGHLY WITH SOAP AND WATER.EYES:FLUSH
THOROUGHLY WITH LG AMOUNTS OF WATER;SEE A
PHYSICIAN.INHALATION:REMOVE TO FRESH AIR.
Fire Fighting
Flash Point:<73F PMCC
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:DRY CHEMICAL,FOAM,CO*2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:CAN EMIT TOXIC FUMES.
Accidental Release
Spill Release Procedures:STOP LEAK.ELIMINATE IGNITION SOURCES.ABSORB
AND WIPE UP WITH RAGS.WASH AREA WITH METHYL ETHYL KETONE(MGK) TO
CLEAN ANY RESIDUAL MATERIAL
Handling
Handling and Storage Precautions:KEEP IN CLOSED CONTAINERS IN SHELTERED
AREA.
Other Precautions:AVOID PROLONGED OR REPEATED SKIN CONTACT.
Exposure Controls
Respiratory Protection:AIR SUPPLIED RESPIRATOR RECOMMENDED.
Ventilation:ADEQUATE TO MINIMIZE VAPORS.
Protective Gloves:POLYETHYLENE
Eye Protection:CHEM GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
HAZ. COMPONET:NIOSH.6-LQ210000,DIMETHYL FORMAMIDE,<5%,TLV:UNK;NIOSH
8-CI6475000,ASBESTOS(MIXED),3% TLV:UNK. KEY1:F2.
Chemical Properties
HCC:F2
Vapor Pres:UNK
Vapor Density:UNK
Spec Gravity:1.36
Solubility in Water:NEGLIGIBLE
Appearance and Odor:ALUMINUM-GRAY PASTE;TOLUENE ODOR.
Percent Volatiles by Volume:46.1
Stability
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZERS,ACIDS,BASES.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:OXIDES OF SULFUR;HYDROGEN
SULFIDE;FORMIC ACID.
Disposal
Waste Disposal Methods:PLACE ABSORBED MATERIAL IN CLOSED CONTAINERS &
DISPOSED OF IAW LOCAL,STATE & FED REGS.DO NOT INCINERATE WASTE &
CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.