BFCJL - PN1066 HARDENER

  • MSDS: BFCJL
  • Manufacturer: PALMER PRODUCTS INC
  • Product Name: PN1066 HARDENER
  • National Stock Number: 5610-00-519-1852
Product Identification

Product ID:PN1066 HARDENER
MSDS Date:01/01/1987
FSC:5610
NIIN:00-519-1852
Kit Part:Y
MSDS Number: BFCJL

Responsible Party
PALMER PRODUCTS, INC
SKIPCK PIKE AND VALLEY FORGE RD
WORCESTER, PA 19490
US

Cage: D0933

Contractor
PALMER PRODUCTS, INC.
8 WORCESTER, PA 19490 US

Telephone: 610-584-4241

Cage: D0933

Ingredients

POLYAMIDE


CATALYST

Fraction By Weight: 45%


SOLVENTS

Fraction By Weight: 55%

ACGIH TLV: 100PPM

Hazards

Effects of Overexposure:NON-TOXIC,EXCEPT FOR POSSIBLE IRRITATION OF
THROAT,EYES WATERING AND NOSE IRRITATION.

First Aid

First Aid:WASH CONTAMINATED AREA CLEAN,FIRST W/ALCOHOL AND THEN W/SOAP
AND WATER.INCASE OF CONTACT W/EYES,FLUSH W/PLENTY OF WATER AND
CONSULT DR.

Fire Fighting

Flash Point:90 F CC 32 C
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL
Fire Fighting Procedures:POLYMER FOAM FOR LARGE FIRES-FIREMEN SHOULD
USE SELF-CONTAIN
Unusual Fire/Explosion Hazard:SOLVENTS ARE FLAMMABLE

Accidental Release

Spill Release Procedures:FLUSH HEAVILY WITH WATER, VENTILATE EXTREMELY
WELL.

Handling

Handling and Storage Precautions:KEEP FROM PROLONGED EXPSURE TO HEAT,
WELL VENTILATED AREA.
Other Precautions:WASH CLOTHING THOROUGHLY BEFORE USING AGAIN IF
CONTAMINATED WITH HARDENER.

Exposure Controls

Respiratory Protection:GENERALLY NOT REQUIRED IN A WELL VENTILATED
AREA.
Ventilation:LOCAL EXHAUST/MECHANICAL
Protective Gloves:RUBBER GLOVES
Eye Protection:NONOGOGGLES
Supplemental Safety and Health
PART B 225-230 F 107-110 C. KEY1:F4.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:225-230F
Vapor Pres:8-1
Vapor Density:2.55
Spec Gravity:0.94
Evaporation Rate & Reference:NOT YET KNOWN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID W/ODOR OF AMMONIA
Percent Volatiles by Volume:58

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME HEATING OF CONTAINER,AREA,NOT WELL
VENTILATED
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PROD.OXIDES
OF CARBON AND NITROGEN

Disposal

Waste Disposal Methods:INCINERATE IN A FURNACE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.