BFCKZ - G-525 JEL-E-PAK

Product Identification

Product ID:G-525 JEL-E-PAK
MSDS Date:01/01/1987
FSC:5970
NIIN:00-522-1634
MSDS Number: BFCKZ

Responsible Party
COMMUNICATIONS TECHNOLOGY CORP
4100 MCEWEN DR SUITE 244
DALLAS, TX 75244
US

Emergency Phone: 214-991-8338

Info Phone: 214-991-8338

Cage: 57412

Contractor
PRECISION METAL PRODUCTS INC SUB OF MACR
UNKNOW BROOKLYN, NY 11206-3204 US

Telephone: 718-387-4724

Cage: 97412

Ingredients

PETROLEUM HYDROCARBONS (AS AN OIL MIST 80-95%)

Fraction By Weight: 87.5%

ACGIH TLV: 5MG/CUM,OILMIST

Hazards

Effects of Overexposure:NO UNUSUAL EFFECTS TO BE EXPECTED.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:400F (C.O.C.)
Lower Limits:UNKN
Upper Limits:UNKN
Extinguishing Media:DRY CHEMICALS,CO*2,WATER SPRAY.
Fire Fighting Procedures:NONE SPECIFIED
Unusual Fire/Explosion Hazard:NONE SPECIFIED

Accidental Release

Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
SWEEPING COMPOUND.

Handling

Handling and Storage Precautions:IN ACCORDANCE WITH GOOD INDUSTRIAL
PRACTICE,HANDLE WITH DUE CARE AND AVOID UNNECESSARY PERSONAL
CONTACT.
Other Precautions:AVOID EYES AND SKIN CONTACT.PROVIDE ADEQUATE
VENTILATION

Exposure Controls

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS UNDATED.OTHER PHONE NO(213) 473-0061(NITE LINE)

Chemical Properties

HCC:N1
Vapor Pres:0.1
Vapor Density:1.0
Spec Gravity:0.88
Evaporation Rate & Reference:NONE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PETROLEUM HYDROCARBONS LIQUID.
Percent Volatiles by Volume:NONE

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING
Stability Condition to Avoid:AVOID EXECESSIVE HEAT FOR LONG PERIODS OF
TIME
Hazardous Decomposition Products:FROM INCOMPLETE COMBUSTION CO MAY BE
FORMED

Disposal

Waste Disposal Methods:USE APPROVED INCINERATION OR LAND FILL IN
ACCORDANCE WITH FEDERAL,STATE AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.