Product ID:ENAMEL, ALKYD,LUSTERLESS 741402
MSDS Date:03/11/1988
FSC:8010
NIIN:00-526-1612
MSDS Number: BFCMT

PRATT & LAMBERT, INC.-INDUSTRIAL COATINGS DIV.

16116 E 13TH ST
WICHITA, KS 67201
US

Preparer: W. A. ELLISON

Cage: FO127

PRATT AND LAMBERT INC

22 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

VM&P NAPHTHA (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

OSHA PEL 300 PPM/400 STEL

ACGIH TLV: 300 PPM; 9192

MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR

CAS: 7758-97-6

RTECS: GB2975000

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.05MG/M3(CR)A2;8990

SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293

SILICA, CRYSTALLINE - FUSED

CAS: 60676-86-0

RTECS: VV7328000

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES
Health Hazards Acute and Chronic:REPEATED EXPOSURE TO CRYSTALLINE
SILICA MAY CAUSE PNEUMOCONIOSIS,A PROGRESSIVELY DISABLING LUNG
DISEASE;RELATIVELY INSOLUBLE CHROMATES MAY CAUSE LUNG
CANCER;CHRONIC OVEREXPOSURE TO LEAD MAY RESULT IN DAMAGE TO BLOOD
FRMING,NERVOUS,URINARY & REPRO SYSTEM;SOLVENTS HAVE BEEN ASSOCIATED
WITH PERM BRAIN & NERVOUS SYS DAMAGE
Explanation of Carcinogenicity:CHROM & CERTAIN CHROM COMP ARE LISTED AS
POTENTIAL CARCIN BY NTP & IARC. LEAD CHROM POTENTIAL ANIMAL CARCIN
BY IARC.
Effects of Overexposure:SWALLOWING-GASTROINTESTINAL IRRITATION, NAUSEA
& VOMITING.ASPIRATION OF MATERIAL INTO LUNG MAY CAUSE CHEMICAL
PNEUMONITIS WHICH CAN BE FATAL.INHALED-MAY CAUSE NOSE & THROAT
IRRITATION. HIGH CONCENTRAT IONS MAY CAUSE ACUTE NERVOUS SYSTEM
DEPRESS.EYE-MAY CAUSE EYE IRRITATION.SKIN-MAY CAUSE DEFATTING AND
IRRITATION OF SKIN
Medical Cond Aggravated by Exposure:PRE-EXISTING KIDNEY CONDITION MAY
BE AGGRAVATED BY EXPOSURE TO LEAD; PRE-EXISTING RESPIRATORY
CONDITION MAY BE AGGRAVATED BY EXPOSURE TO CRYSTALLINE SILICA.

First Aid:IF SWALLOWED-DO NOT INDUCE VOMITING. CALL POISON CONTROL
CENTER, HOSPITAL EMERGENCY ROOM OR MD IMMED. INHALED-REMOVE TO
FRESH AIR IMMED. IF BREATHING HAS STOPPED, GIVE ARTIFICIAL
RESPIRATION. KEEP WAR M & QUIET. MED ATTN IMMED. EYE-FLUSH WITH
LARGE AMOUNTS OF WATER AT LEAST 15 MIN. GET MED ATTN. SKIN-REMOVE
CONTAMINATED CLOTHING. WASH AFFECTED AREA WITH SOAP & WATER. MED
ATTN IF IRRITATION PERSISTS

Flash Point:102F-39C
Extinguishing Media:NFPA CLASS B FIRE EXTINGUISHER DESIGNED TO
EXTINGUISH FLAMMABLE LIQUID FIRES. POLYMER FOAM PREFERRED FOR LARGE
FIRES.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS. WATER
MAY BE INEFFECTIVE, BUT MAY BE USE TO PREVENT PRESSURE BUILD-UP. IF
WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMP PROD MAY CAUSE A
HEALTH HAZARD.OBTAIN MED ATTN.KEEP CONTAINER TIGHTLY CLOSED.ISOLATE
FROM HEAT, ELEC EQUIP, SPARKS & FLAME.

Spill Release Procedures:KEEP SPECTATORS AWAY. ELIM ALL IGNITION
SOURCES. DIKE & CONTN SPILL WITH INERT MATL. TR LQDS TO COV MTL
CNTNR FOR RECOV OR DISP OR REM W/INERT ABSORB.USE NON-SPRKG TOOLS.
PLACE ABSORB MAT IN COV METAL CONTNR FOR DISP. PREVENT CONTAM OF
SEW, STRMS,ETC

Handling and Storage Precautions:DO NOT STORE ABOVE 95 DEGREES F. STORE
LARGE QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH
USE. DO NOT BREATHE SANDING DUST. DO NOT WASH AND RE-USE CONTAINERS
FOR ANY PURPOSE. DO NOT WELD, BRAZE OR CUT ON EMPTY CONTAINER.
NEVER USE PRESSURE TO EMPTY.

Respiratory Protection:REFER TO OSHA STD 29CFR1910.1025 FOR RESPIR
PROTECTION FOR LEAD.WELL-VENTILATED AREA,RESPIR PROTECT NOT
REQUIRED.RESTRICTED AREA,NIOSH APPROVED CHEM CART RESPIR MAY BE
REQUIRED.CONFINED AREA,NIOSH/MSH A APPROVED AIR-SUPPLIED RESPIR.
Ventilation:PROVIDE GENERAL DILUTION & LOCAL EXHAUST VENTILATION.
LEAD-REFER TO OSHA STANDARDS 29CFR1910.1025 FOR VENTILATION.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES
Eye Protection:WEAR SAFETY SPECTACLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT. SEE
OSHA STANDARD FOR LEAD.
Supplemental Safety and Health
SOLVENT IMPERMEABLE GLOVES ARE REQUIRED FOR REPEATED OR PROLONGED
CONTACT.

HCC:F4
Boiling Pt:B.P. Text:280F-388F
Vapor Pres:2
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:58

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
IGNITION.
Hazardous Decomposition Products:BURNING, WHEN HEATED BY WELDING OR
CUTTING, WILL PRODUCE SMOKE, CARBON MONOX & CARBON DIOX. MAYBE
OXIDES OF LEAD.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS AND
FLAME.

Waste Disposal Methods:IAW FED, STATE & LOCAL LAWS. INCINERATE ONLY IN
EPA PERMITTED FACILITY. DO NOT INCINERATE CLOSED CONTAINERS.
OBSERVE PRECAUTIONS FOR DISPOSAL OF FLAMMABLE MATERIALS.
CONTAMINATED ABSORBANT MAY BE DISP OSED IN A HAZARDOUS WASTE
LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.