Product ID:TT-E-508C
MSDS Date:01/01/1985
FSC:8010
NIIN:00-527-2633
MSDS Number: BFCVW

DURON,INC

10406 TUCKER ST
BELTSVILLE, MD 20705-2201
US

Cage: HO323

DURON,INC

BELTSVILLE, MD 20705 US

Telephone: 301-937-4600

Cage: HO323

TITANIUM DIOXIDE SILICATES CALCIUM CARBONATE

Fraction By Weight: 48.6%

ALKYD RESIN (SOLIDS)

Fraction By Weight: 23.0%

MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 28.1%

ACGIH TLV: 100PPM

DRIERS

Effects of Overexposure:IRRIT OF RESPIRATORY TRACT & EYES.INHAL OF HIGH
VAP CONCENTRATIONS MAY HAVE RESLTS RANGING FR DIZZNE

First Aid:EYES-FLUSH W/WATER FOR 15 MIN-GET MEDICAL ATTN.IF OVERCOME BY
VAPOR,REMOVE FROM EXPOSED AREA IF BREATHING IS IRREGULAR, OR
STOPPED,START RESUSCITATION.

Flash Point:104F TCC 40 C
Lower Limits:0.9
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:FIGHT LIKE A GASOLINE FLASH FIRE.
Unusual Fire/Explosion Hazard:EXPOSURE TO ECTREME HEAT MAY CAUSE
BURSTING OF CLOSED CONTAINERS

Spill Release Procedures:REMOVE ALL IGNITION SOURCES,KEEP PEOPLE AWAY.
RECOVER LIQUID ADD ABSORBENT TO SPILL AREA,AVOID BREATHING VAPORS.
VENTILATE ENCLOSED SPACES.KEEP PETRO PRODUCTS OUT OF ALL PUBLIC
SEWER & STREAM.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPRARKS AND OPEN
FLAMES.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN. DO NOT TAKE
INTERNALLY

Respiratory Protection:HYDROCARBON OR ORGANIC VAP CANISTERS.SELF-CNTND
APPARAT ABOV TLV
Ventilation:LOC EXHAUST-FACE VELOCITY 60FPM
Protective Gloves:RBBR OR PLASTIC
Eye Protection:SAFETY GOGGLES OR GLASSE
Other Protective Equipment:MUST COMPLY W/SECTION 1910,132.135 OSHA STDS
Supplemental Safety and Health

Vapor Density:HEAV
Spec Gravity:1.369
Appearance and Odor:LIQUID PAINT-MILD ODOR
Percent Volatiles by Volume:48.9

Stability Indicator/Materials to Avoid:NO
CARBON MONOXIDE IN THE CASE OF INCOMPLETE COMBUSTION.
Stability Condition to Avoid:STRONG OXIDANTS LIKE LIQ. CHLORINE &
CONCENT. OXYG HIGH TEMP
Hazardous Decomposition Products:NO

Waste Disposal Methods:PLACE IN CLOSED DOT APPRVD CONTAINER. RAGS &
ABSORBENT MATERIAL SHD BE IMMED. IMMERSED IN WATER.USE APPRVD
LANDFILL IN ACCORDANCE W/LOCAL STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.