BFDBG - A7526F ADHESIVE:CLYPTAL RESIN

  • MSDS: BFDBG
  • Manufacturer: INSULATING MATERIALS INC
  • Product Name: A7526F ADHESIVE:CLYPTAL RESIN
  • National Stock Number: 8040-00-530-4820
Product Identification

Product ID:A7526F ADHESIVE:CLYPTAL RESIN
MSDS Date:01/01/1987
FSC:8040
NIIN:00-530-4820
MSDS Number: BFDBG

Responsible Party
INSULATING MATERIALS INC
1 CAMPBELL RD
SCHENECTADY, NY 12306
US

Emergency Phone: 518-395-3310

Info Phone: 518-395-3310

Cage: 08800

Contractor
INSULATING MATERIALS INC
1404 SCHENECTADY, NY 12306-9701 US

Telephone: 518-395-3300

Cage: 08800

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

OSHA PEL 100 PPM

Hazards

Effects of Overexposure:NAUSEA, DIZZINESS, & MILD SKIN SENSITIZATION.

First Aid

First Aid:INHALATION:MOVE TO FRESH AIR. EYES:IMMEDIATELY FLUSH W/WATER
FOR AT LEAST 15 MIN. CALL MD. SKIN:WIPE MATERIAL OFF W/DRY RAGS.
WAS W/MILD SOAP & WATER.

Fire Fighting

Flash Point Method:COC
Flash Point:50.0F,10.0C
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:NONE REQUIRED
Unusual Fire/Explosion Hazard:KEEP AWAY FROM FLAME & SPARKS

Accidental Release

Spill Release Procedures:WIPE UP W/DRY RAGS.

Handling

Handling and Storage Precautions:DO NOT BREATHE VAPORS EXCESSIVELY.
AVOID SKIN OR EYES CONTACT.
Other Precautions:AVOID SPARKS & OPEN FLAME.

Exposure Controls

Ventilation:LOCAL EXHAUST-PREFERED.MENCHANICAL-TO CONTROL SOLVENT VAPOR
Eye Protection:SAFETY GLASSES.
Supplemental Safety and Health

Chemical Properties

HCC:F2
Spec Gravity:0.96
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE, THIN LIQUID/SOLVENT ODOR.
Percent Volatiles by Volume:60

Stability

Stability Indicator/Materials to Avoid:YES
NONE

Disposal

Waste Disposal Methods:MFG RECOMMENDS BURN & BURY IN LANDFILL. DISPOSE
IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.