Product ID:MIL-P-19453A,FORMULA 14ND (MFR CODE N-69-B)
MSDS Date:01/01/1985
FSC:8010
NIIN:00-531-8557
MSDS Number: BFDFX

JOTUN-BALTIMORE COPPER PAINT CO.

Emergency Phone: 301-539-0045

Cage: 85319

JOTUN-BALTIMORE COPPER PAINT CO.

Cage: 85319

ZINC CHROMATE

CAS: 13530-65-9

RTECS: GB3290000

Fraction By Weight: 25%

OSHA PEL 0.1 MG/M3 (CRO3)

ACGIH TLV: 0.01MG/M3(CR)A1;9192

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 17.5%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:SKIN/EYE:IRRIT. VAPORS:RESP TRACT IRRIT,CNS
DEPRESSION,HEADACHE,DIZZY,CONFUSION,COMA.

First Aid:EYE:FLUSH WITH WATER 15 MIN,SEE PHYSICIAN. SKIN:WASH WITH
SOAP AND WATER,REMOVE CONTAMINATED CLOTHING,CONSULT PHYSICIAN.
VAPOR:REMOVE TO FRESH AIR,RESTORE BREATHING IF NEEDED,CALL A
PHYSICIAN.

Flash Point:80F/26C
Lower Limits:1.0
Extinguishing Media:CARBON DIOXIDE,DRY CHAMEICAL OR FOAM.
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER FOG TO COOL EXPOSED
CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. VENTILATE
AREA,AVOID BREATH VAPORS.CONTAIN AND REMOVE WITH INERT ABSORBENT
AND NON-SPARKING TOOLS.

Handling and Storage Precautions:DO NOT ABOVE 100F/37C,KEEP CLOSURE
TIGHT,DO NOT STORE OR USE NEAR HEAT,SPARKS OR FLAMES.
Other Precautions:DO NOT GET IN EYES,AVOID PROLONGED CONTACT WITH SKIN
AND BREATHING OF VAPORS OR SPRAY MIST,DO NOT TAKE INTERNALLY.

Respiratory Protection:NIOSH/MSHA APPROVED RESP DIVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL EXHAUST/GENERAL
Protective Gloves:SOLVENT RESIST
Eye Protection:SAFETY GLASS,SPLASH SHELD
Other Protective Equipment:PROTECTIVE CREAM
Supplemental Safety and Health
CLASS 1 PRODUCT.PKG: 5 GAL PAIL

HCC:F4
Boiling Pt:B.P. Text:280F/137C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:36

Stability Condition to Avoid:HIGH TEMPS,CONTAMINATION WITH FOREIGN
MATERIALS.
Hazardous Decomposition Products:HAZARDOUS FUMES WHEN HEATED TO
DECOMPOSITION.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE AND
FEDERAL REGULATION. INCINERATE IN APPROVED FACILITY.DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.