Product ID:125-880C CATALYST, PT B
MSDS Date:01/01/1985
FSC:8030
NIIN:00-535-9780
MSDS Number: BFDGZ

AMERICAN LACQUER SOLVENTS CO

PO BOX 803
VALLEY FORGE, PA 19482-0803
US

Emergency Phone: 813-236-5594

Cage: 91470

AMERICAN LACQUER SOLVENTS CO

VALLEY FORGE, PA 19482-0803 US

Cage: 91470

PHOSPHORIC ACID (SARA III)

CAS: 7664-38-2

RTECS: TB6300000

Fraction By Weight: 3.9%

OSHA PEL 1 MG/M3/3 STEL

ACGIH TLV: 1 MG/M3/3 STEL; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 36.2%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

2-BUTOXYETHANOL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 16.0%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

BUTYL ALCOHOL

Fraction By Weight: 23.9%

ACGIH TLV: C,50 PPM

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15.4%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:INH/SKIN ABSORPTION:HDCH/DIZZ/NAUS/VOMIT.
EYES:IRRITATED BY LIQUID. VAPORS IRRITATING TO BREATHE.

First Aid:INH:MOVE TO FRESH AIR, CALL MD. EYES/SKIN:IMMEDIATELY FLUSH
W/PLENTY OF WATER AT LEAST 15 MINS. SEE MD.

Flash Point:45F,7.2C TOC
Lower Limits:1.0
Upper Limits:12.0
Extinguishing Media:CO*2,FOAM, DRY CHEMICAL
Fire Fighting Procedures:SMALL FIRE:USE CO*2/DRY CHEM. LARGE
FIRE:ALCOHOL TYPE FOAM.
Unusual Fire/Explosion Hazard:HAZARDOUS EXPOSED TO HEAT & OPEN FLAMES.

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. FLUSH
HEAVILY W/WATER.

Handling and Storage Precautions:AVOID CONTACT WITH SKIN & EYES. AVOID
BREATHING VAPORS.

Respiratory Protection:NIOSH/MSHA APPRVD ALL PURPOSE CANISTER MASK.
Ventilation:LOCAL EXHAUST:PREFERABLE. GENERAL MECHANICAL:ACCEPTABLE
Protective Gloves:BUTYL RUBBER
Eye Protection:FACE SHIELD
Other Protective Equipment:EYE BATH & SAFETY SHOWER
Supplemental Safety and Health
ADDRESS:2601 E. HENRY AVE, TAMPA, FLA 33610. ALSO CONTAINS 4.6% WATER.
CONFORMS TO MIL-P-15328B. PT B OF A 2 PART KIT. PART A IS 125-880
WASH PRIMER. PT B HAS THINNER ALREADY MIXED IN.KEY1:J1.

HCC:F2
Boiling Pt:B.P. Text:177F,81C
Spec Gravity:0.8540

Stability Indicator/Materials to Avoid:YES

Waste Disposal Methods:ATOMIZE INTO AN INCINERATOR IN ACCORDANCE
W/LOCAL,STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.