Product ID:4043
MSDS Date:06/01/1990
FSC:3439
NIIN:00-542-0752
MSDS Number: BFDLL

HARRIS J W CO INC

10930 DEERFIELD RD.
CINCINNATI, OH 45242-4110
US

Emergency Phone: 800-424-9300

Info Phone: 513-891-2000

Cage: JO820

SHAMROCK SUPPLY CO

SANTA ANA, CA 92707 US

Telephone: 714-556-4422

Cage: 48111

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 4.5-6.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 0.8%

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0.3%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.05%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

MAGNESIUM

CAS: 7439-95-4

RTECS: OM2100000

Fraction By Weight: 0.05%

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 0.10%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

TITANIUM

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: 0.2%

ACGIH TLV: 10 MG/CUM

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: BAL

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC:LONG TERM EXPOSURE TO WELDING
FUME,GASES OR DUST MAY CONTRIBUTE TO PULMONARY IRRITATION OR
PNEUMOCONIOSIS.
Effects of Overexposure:SHORT TERM EXPOSURE TO WELDING FUME MAY RESULT
IN DISCOMFORT,DIZZINESS,NAUSEA,DRYNESS OR IRRITATION OF THROAT
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTIONS OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY FUME
IRRITANTS

First Aid:REMOVE FROM DUST OR FUME EXPOSURE. IF BREATHING HAS
STOPPED,PERFORM ARTIFICIAL RESPIRATION. SUMMON MEDICAL AID
IMMEDIATELY.

Extinguishing Media:USE PROPER MATERIAL FOR SURROUNDING FIRE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:WELDING ARC,OPEN FLAME & SPARKS CAN
IGNITE COMBUSTIBLES.

Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE &
PLACE IN SUITABLE DISPOSAL CONTAINER.

Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES. AVOID ELECTRICAL SHOCK
BY MAINTAINING DRY WORK AREA.

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR.
Ventilation:USE ENOUGH VENTILATION & LOCAL EXHAUST AT THE ARG TO KEEP
THE FUMES & GASES BELOW TLV.
Protective Gloves:WELDERS
Eye Protection:FACE SHIELD WITH FILTER LENS.
Other Protective Equipment:SUBSTANTIAL DARK CLOTH,ARM
PROTECTOR,APRON,HAT,SHOULDER PROTECTION.
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE
EATING,SMOKING,USING SANITARY FACILITIES.
Supplemental Safety and Health

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID WIRE OR ROD

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES OF METALS & METAL
OXIDES,CO,NO*2,O*3.

Waste Disposal Methods:DISPOSE OF FUME,FLUX OR WELDING GRINDING RESIDUE
FROM THE WORK AREA OR FROM FILTERS IAW ALL APPLICABLE FEDERAL,STATE
& LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.