Product ID:EPI-SEAL UNIVERSAL RESIN,EPOXY,PART A
MSDS Date:01/01/1985
FSC:4730
NIIN:00-542-3359
Kit Part:Y
MSDS Number: BFDMC

Emergency Phone: 215-696-9220

Cage: DO082

Telephone: 610-696-9220 OR 215-739-9960

Cage: DO082

PIGMENTS

Fraction By Weight: 19%

VEHICLE (TYPE UNSPECIFIED)

Fraction By Weight: 76%

FILLERS (TYPE UNSPECIFIED)

Fraction By Weight: 5%

Effects of Overexposure:HEADACHE,PRIMARY IRRIT TO SKIN EXPOSED ON
PROLONG/REPEAT CONTACT.IRRITATING TO EYES.

First Aid:INHAL-REMOVE TO FRESH AIR.GIVE ARTIF RESP IF NOT BREATHING.
SKIN-WASH THOROUGHLY WITH SOAP & WATER OR WATERLESS
CLEANER.EYES-FLUSH W/WATER FOR 15 MIN.INGEST-INDUCE VOMITING.GET
MEDICAL ASSISTANCE FOR ALL OF ABOVE EXPOSURES.

Flash Point:>250 F
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:WATER SPRAY,FOAM,CARBON DIOXIDE,DRY CHEMICAL
Fire Fighting Procedures:USE SELF CONTAINED BREATHING GEAR,STAY
UPWIND,(SEE SUP DATA)
Unusual Fire/Explosion Hazard:HANDLE AS COMBUSTIBLE MATERIAL

Spill Release Procedures:USE DIKES TO CONTAIN.WEAR APPD RESPIR EQUIP &
SKIN/EYE PROTECTION EQUIP.PUMP,SHOVEL OR SCRAPE INTO SALVAGE
DRUMS.SOAK UP WITH ABSORBENT.GUARD AGAINST FIRE HAZARDS.REMOVE
IGNITION SOURCES.

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS.USE
ONLY WITH APPROVED CURING AGENT.WASH EXPOSED SKIN AFTER
HANDLING.STORE IN COOL,DRY AREA.
Other Precautions:REMOVE CONTAMINATED CLOTHES & LAUNDER BEFORE
REUSE.DESTROY CONTAMINATED SHOES & LEATHER ARTICLES.USE RUBBER
GARMETS.AVOID CONTACT WITH EYES,SKIN & CLOTHING.

Respiratory Protection:NIOSH APPROVED RESPIRATORY EQUIPMENT
Ventilation:LOCAL FOR MIXING AND IN APPLYING.HAVE VAPORS BLOWN AWAY.
Protective Gloves:RUBBER
Eye Protection:FACE SHIELD OR GOGGLES
Other Protective Equipment:RUBBER GARMENTS,SAFETY SHOWER,EYE BATH
Supplemental Safety and Health
SPRAY WATER ON CONTAINERS EXPOSED TO FIRE TO KEEP COOL.ITEM IS ASSEMBLY
1 OF MIL-R-17882.KEY1:N1.

HCC:N1
Boiling Pt:B.P. Text:>250 F
Vapor Pres:UNK
Vapor Density:UNK
Spec Gravity:1.2
Solubility in Water:<1%
Appearance and Odor:WHITE COLORED LIQUID WITH SLIGHT DISTINCTIVE ODOR
Percent Volatiles by Volume:<5

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS,MINERAL ACIDS
Stability Condition to Avoid:CAN REACT VIGOROUSLY WITH STRONG
OXIDIZERS,MINERAL ACIDS
Conditions to Avoid Polymerization:ACCID CONTAMINATION W/CURING AGENTS
RELEASES HEAT

Waste Disposal Methods:BURN IN APPROVED CHEMICAL INCINERATOR OR BURY IN
AN APPROVED LANDFILL THAT MEETS FEDERAL,STATE & LOCAL POLLUTION
REGULATIONS & ORDINANCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.