BFDMK - PHILLYBOND,6 HARDENER
- MSDS: BFDMK
- Manufacturer: PHILADELPHIA RESINS CORP
- Product Name: PHILLYBOND,6 HARDENER
- National Stock Number: 4730-00-542-3362
Product Identification
Product ID:PHILLYBOND,6 HARDENER
MSDS Date:01/01/1987
FSC:4730
NIIN:00-542-3362
Kit Part:Y
MSDS Number: BFDMK
Responsible Party
Emergency Phone: 215-855-8450
Cage: 20420
Contractor
Telephone: 215-855-8450
Cage: 20420
Ingredients
SILICA, AMORPHOUS, DUST
CAS: 112945-52-5
RTECS: VV7310000
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3; 8990
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
PHENOL
CAS: 108-95-2
RTECS: SJ3325000
OSHA PEL S, 5 PPM
ACGIH TLV: S, 5 PPM; 8990
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:SKIN-IRRIT,SENSITIZER
First Aid
First Aid:EYE-FLUSH W/ WATER FOR 15 MIN & CALL MD.SKIN-WASH W/ SOAP &
WATER IMMEDIATELY
Fire Fighting
Flash Point:200F,93C PMCC
Extinguishing Media:CO*2,FOAM,DRY CHEMICALS,WATER
Fire Fighting Procedures:NONE PER MFR
Unusual Fire/Explosion Hazard:NONE KNOWN PER MFR
Accidental Release
Spill Release Procedures:WIPE UP WITH CLEAN RAGS.RESIDUE MAY BE CLEANED
W/ SOLVENT DAMPENED RAG.
Handling
Handling and Storage Precautions:AVOID BREATHING VAPORS AND AVOID SKIN
CONTACT.
Exposure Controls
Ventilation:LOCAL EXHAUST PREFERABLE,MECHANICAL ACCEPTABLE.
Protective Gloves:IMPRV RUB,PLAST
Eye Protection:GOGGLES
Other Protective Equipment:CLEAN LONG LEGGED & SLEEVED CLOTHING
Supplemental Safety and Health
MSDS PREP:85244.SPEC:ASSEMBLY 2.PART A OF 2 PART KIT.
Chemical Properties
Boiling Pt:B.P. Text:N/K PER MFR
Spec Gravity:2
Evaporation Rate & Reference:NON-VOLATILE
Solubility in Water:N/K PER MFR
Appearance and Odor:BLACK,AMINE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & BASES
Hazardous Decomposition Products:CO,CO*2,OXIDES OF N*2
Conditions to Avoid Polymerization:UNCONTROLLED AMOUNTS OF EPOXY RESIN
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.