Product ID:LACQ ACRYLIC N/C CAM WHITE 37875
MSDS Date:01/01/1987
FSC:8010
NIIN:00-543-2085
MSDS Number: BFDMX

PRATT & LAMBERT

16116 E 13TH ST
WICHITA, KS 67201
US

Cage: PRATT

PRATT AND LAMBERT INC

2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

*TOLUOL/TOLUENE

RTECS: XV1400000

Fraction By Weight: 15%

ACGIH TLV: 100PPM

*ISOBUTYL ACETATE

RTECS: NP9100000

Fraction By Weight: 45%

ACGIH TLV: 150PPM

ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

*METHYL ETHYL KETONE

RTECS: PM7780000

Fraction By Weight: <5%

ACGIH TLV: 200PPM

*XYLOL/XYLENE

RTECS: ZF1575000

Fraction By Weight: <0.5%

ACGIH TLV: 100PPM

Effects of Overexposure:INHAL:ANEST. IRRIT. OF NOSE, THROAT & POSSIBLE
DIZZ & NAUSEA.

First Aid:INHAL:REMOV FR EXPOSR & PROVID FRESH AIR.SPLASH EYES:FLUSH
IMMED.W/LG AMTS OF WATR F/15 MIN.SPLASH SKIN:REMOV CONTAMINATED
CLOTHING & WASH AFFECTED AREA W/WATR.INGESTION:DO NOT INDUCE
VOMITING.CONSULT A DR. IMMED. IN ALL CASES.

Flash Point:21F TCC-6C TCC
Extinguishing Media:CO*2,DRY CHEM,OR ALCOHOL FOAM.POLYMR FOAM PREF F/LG
FIRES.
Fire Fighting Procedures:SELF-CONTND BREATH APPARAT SHLD BE AVAIL
F/FIREMEM.
Unusual Fire/Explosion Hazard:KP CONTNR TIGHT CLOS.ISOLAT FR
HEAT,ELECTR EQPMT,SPARK & OPN FLAM.CLOS CONTNRS MAY EXPLO WHEN
EX(SUP

Spill Release Procedures:REMOV ALL SOURCES OF IGNIT(FLAMES,HOT
SURFACES,ELECTR,STATIC OR FRICTIONAL.SPARKS):VENTILAT AREA & AVOID
BREATHING VAPORS.REMOV W/INERT ABSORBENT & USE NON-SPARKING
TOOLS.STEPS MUST BE TAKEN TO AVOID CONTAM OF GROUND WATER OR
STREAMS.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG QTY
IN COMPLIANCE W/OSHA 1910.106.CONTNRS SHLD BE BONDED TO EA OTH &
GROUNDED PROPER WHEN TRANSFR/POURING IN ANOT CO
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTAINERS. DO NOT USE
UNTIL ALL SAFETY PRECAUTIONS & MIXING DIRECTIONS HAVE BEEN READ &
FULLY UNDERSTOOD BY THE USER.

Respiratory Protection:MECH RESPIRAT TO REMOV OVERSPRAY IN OUTDOOR OR
OPEN AREA.
Ventilation:PROVID GEN. DILUT/LOC EXHAUST VENTILAT IN VOL TO KP BELO
TLV
Protective Gloves:SOLVNT IMPERMEA
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:USE PROTECTIVE EQPMT TO PREVENT SKIN
CONTACT.
Supplemental Safety and Health
UNUS FIRE/EXPLOS HAZ:PLODE WHEN EXPOSED TO EXTREME HEAT.DO NOT APPLY TO
VERY HOT SURFACES.

HCC:F3
Boiling Pt:B.P. Text:174-724F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:73

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ACIDS OR ALKALIS.
Stability Condition to Avoid:FIRES,HEAT,SPARKS & HOT SURFACES.
Hazardous Decomposition Products:SMOKE & OXIDES OF NITROGEN & CARBON
WHEN BURNED
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIVE CHEMS
W/O TECHNICAL SUPERVISIO

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL,STATE & FEDERAL
REGULATIONS. INCINERATE IN EPA APPRVD FACILITY.DO NOT INCINERATE
CLOSED CONTAINER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.