BFDNW - MIL-R-17882C,ASSEMB.1&2,PART B ACTIVATOR

  • MSDS: BFDNW
  • Manufacturer: BONDED PRODUCTS INC
  • Product Name: MIL-R-17882C,ASSEMB.1&2,PART B ACTIVATOR
  • National Stock Number: 8040-00-543-4067
Product Identification

Product ID:MIL-R-17882C,ASSEMB.1&2,PART B ACTIVATOR
MSDS Date:01/01/1987
FSC:8040
NIIN:00-543-4067
MSDS Number: BFDNW

Responsible Party
BONDED PRODUCTS, INC

Emergency Phone: (215)696-9220

Cage: DO082

Contractor
BONDED PRODUCTS, INC
39 WEST CHESTER, PA 19381-0039 US

Telephone: 610-696-9220 OR 215-739-9960

Cage: DO082

Ingredients

PIGMENTS (TYPE NOT SPECIFIED)

Fraction By Weight: 1%.


CATALYST (TYPE NOT SPECIFIED

Fraction By Weight: 79%


ADDITIVES

Fraction By Weight: 20%.

Hazards

Effects of Overexposure:NAUSEA, DIZZINESS FROM INHALATN. REDNESS OF
SKIN/DERMATITIS AFTER PROLONGED OR REPEATED CONTACT.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR.CALL MD.EYE:IMMEDIATELY FLUSH W/WATER
FOR 15 MIN. CALL MD. SKIN:WASH W/SOAP & WATER. REMOVE CONTAMINATED
CLOTHING & WASH BEFORE REUSE. CALL MD.

Fire Fighting

Flash Point:>250F COC
Extinguishing Media:DRY CHEMICAL, CO*2, FOAM,WATER FOG
Fire Fighting Procedures:COOL EXPOSED CONTAINERS W/WATER. MUST WEAR
MASK (MFG REC)

Accidental Release

Spill Release Procedures:VENTILATE AREA. AVOID SKIN CONTACT OR
BREATHING OF VAPOR. WIPE UP OR USE A SUITABLE ABSORBENT (SAWDUST,
CLAY, SAND, ETC)

Handling

Handling and Storage Precautions:AVOID CONTACT W/SKIN & EYES.DO NOT
BREATHE VAPORS. MUST HAVE GOOD VENTILATION.
Other Precautions:KEEP STORED IN COOL PLACE. AVOID HEAT, FLAMES, &
SPARKS.

Exposure Controls

Respiratory Protection:IN CONFINED AREAS NIOSH/MSHA APPROVED RESP. (FOR
SPRAYING)
Ventilation:LOCAL EXHAUST IS REQUIRED
Protective Gloves:NOPRN/POLYETH
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:COVERALLS
Supplemental Safety and Health
SPECIFIC GRAVITY:1.0 PLUS OR MINUS 0.15. PERCENT VOLATILE BY VOL:<1% AC
DERMAL LD-50 RABBIT 3000 MG/KG

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>250F
Appearance and Odor:BLACK LIQUID W/SLIGHT AMMONIA ODOR

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STORAGE AT HIGH TEMPERATURES
Hazardous Decomposition Products:CO*2, CO, AMMONIA, NIROGEN OXIDES,
HYDROCARBONS

Disposal

Waste Disposal Methods:BURN IN AN INCINERATOR W/AN AFTERBURNER AND
SCRUBBER IN ACCORDANCE W/LOCAL, STATE, AND FEDERAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.