BFDPB - ACETIC ACID
- MSDS: BFDPB
- Manufacturer: CHEMICAL COMMODITIES AGENCY(DIST) MC 3(MFG)
- Product Name: ACETIC ACID
- National Stock Number: 6750-00-543-4407
Product Identification
Product ID:ACETIC ACID
MSDS Date:01/01/1985
FSC:6750
NIIN:00-543-4407
MSDS Number: BFDPB
Responsible Party
HIGHLAND, CA 92346-2640
US
Emergency Phone: 714-864-2310
Info Phone: 714-864-2310
Cage: 60777
Contractor
Telephone: 909-864-2310
Cage: 60777
Ingredients
ACETIC ACID (SARA III)
CAS: 64-19-7
RTECS: AF1225000
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM/15 STEL; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:SKIN & EYES-CAUSES BURNS
INHALATION-COUGHING,CHEST PAIN.IRRITATES NOSE & THROAT.CAUSES
NAUSEA,VOMIT
First Aid
First Aid:SKIN,EYES-FLUSH WITH PLENTY WATER FOR AT LEAST 15 MIN.GET
MEDICAL CARE FOR EYES.IF INHALED,REMOVE TO FRESH AIR.GIVE OXYGEN IF
BREATHING IS DIFFICULT.CALL A PHYSICIAN
Fire Fighting
Flash Point:103 F T.C.C.
Lower Limits:5.4
Upper Limits:16.0
Extinguishing Media:SMALL FIRES-CARBON DIOXIDE,DRY
CHEMICAL.LARGE-ALCHOL FOAM
Fire Fighting Procedures:ADDITION OF WATER WILL REDUCE FIRE INTENSITY
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:FLUSH SPILLS WITH LARGE AMOUNTS OF
WATER.ABSORB IF POSSIBLE
Handling
Handling and Storage Precautions:KEEP FROM SPARKS,HEAT,FLAME.AVOID
BREATHING VAPOR.ACETIC ACID FREEZES AT 62F.STORE ABOVE 62F.IF
FROZEN THAW BY MOVING TO WARM AREA.
Exposure Controls
Respiratory Protection:FRESH AIR MASK IN CONFINED AREA
Ventilation:LOCAL-PREFERRABLE,GENERAL-ACCEPTABLE
Protective Gloves:RUBBER
Eye Protection:VAPOR-PROOF GOGGLES
Other Protective Equipment:FULL FACE MASK.IMPERVIOUS APRON,EYE
BATH,SAFETY SHOWER
Supplemental Safety and Health
Chemical Properties
HCC:F6
Boiling Pt:=117.9C, 244.1F
Vapor Density:2.1
Spec Gravity:1.0512
Evaporation Rate & Reference:0.97
Solubility in Water:COMPLETE
Appearance and Odor:WATER-WHITE LIQUID,SHARP ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH ALKALIES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCT
CARBON MONOXIDE & DIOXIDE
Disposal
Waste Disposal Methods:PLACE ABSORBED MATERIAL IN CONTAINERS SUITABLE
FOR SHIPMENT TO DISPOSAL AREA.ULTIMATE DISPOSAL MAY BE ACCOMPLISHED
BY INCINERATING IN A FURNACE UNDER CONTROLLED CONDITIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.