Product ID:TIN/LEAD SOLDER, QQ-S-571
MSDS Date:01/01/1987
FSC:3439
NIIN:00-824-9856
MSDS Number: BHBBQ

BOW SOLDER PRODUCTS CO.

900 HOBSON ST
UNION, NJ 07083

Emergency Phone: (201) 686-6040

Info Phone: (201) 686-6040

Cage: 52329

BOW ELECTRONIC SOLDERS

SAYREVILLE, NJ 08872 US

Telephone: 732-316-2177

Cage: 52329

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 37.5%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 61.5%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

ROSIN ACID

CAS: 8050-09-7

DIPROPYLENE GLYCOL

CAS: 110-98-5

RTECS: UB8785000

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: METALLIC TASTE ABDOMINAL
PAIN, NAUSEA, JOINT OR MUSCLE PAIN OR WEAKNESS. POSSIBLE LOSS OF
WEIGHT, MENTAL CONFUSION, LEAD LINE ON GUMS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:LEAD POISONING AFTER LONG-TERM EXTREME EXPOSURE
FROM INGESTION OR INHALATION OF COMPOUNDS OR FUMES. METALLIC TASTE
ABDOMINAL PAIN, NAUSEA, JOINT OR MUSCLE PAIN OR WEAKNESS. POSSIBLE
LOSS OF WEIGHT, ME NTAL CONFUSION, LEAD LINE ON GUMS.

First Aid:INHALATION: REMOVE FROM AREA; SEE PHYSICIAN. IF BURNED FROM
MOLTEN METAL, GIVE ORDINARY BURN FIRST AID. DON'T ATTEMPT TO REMOVE
ROSIN FROM SECOND OR THIRD DEGREE BURNS. USE SOLVENTS TO REMOVE
ROSIN FR OM MINOR FIRST DEGREE BURNS.

Flash Point:CORE: 300F
Extinguishing Media:CORE: SPRAY, FOAM, DRY POWDER, CO2
Fire Fighting Procedures:IN EXTREMELY HIGH TEMP FIRES, LEAD MAY EMIT
TOXIC FUMES. WHEN IN PROXIMITY TO HIGHLY OXIDIZING MATERIALS AT
VERY HIGH TEMPS, LEAD MAY REACT VIGOROUSLY.
Unusual Fire/Explosion Hazard:MODERATE HAZARD WHEN HIGH CONCENTRATION
OF VERY FINE METALLIC DUST IS EXPOSED TO HIGH HEAT OR OPEN FLAME.
HOT LIQUID ROSIN CORE MAY FOAM WITH LIQUID WATER.

Spill Release Procedures:NORMAL HOUSEKEEPING FOR SOLID METAL. METALLIC
POWDER OR DUST SHOULD BE VACUUMED OR WET SWEPT USING A RESPIRATOR
AND PROTECTIVE CLOTHING.

Handling and Storage Precautions:USE GOOD HOUSEKEEPING PRACTICES TO
PREVENT ACCUMULATIONS OF DUST/TO KEEP AIRBORNE DUST CONCENTRATIONS
AT A MINIMUM. AVOID BREATHING DUST OR FUMES.
Other Precautions:WASH HANDS AFTER HANDLING. DON'T SMOKE OR EXPOSE FOOD
TO DUST. KEEP AREA CLEAN.

Ventilation:LOCAL EXHAUST: FUME HOOD OVER WORK AREA. MECHANICAL: 200
FT./MIN. AIR VELOCITY INTO HOOD OPENING.
Protective Gloves:NEAR MOLTEN OR HOT METAL
Eye Protection:SAFETY GLASSES
Other Protective Equipment:FACE SHIELD IF DANGER OF SPLASHING, MOLTEN
METAL. SAFETY EYEWASH STATIONS SHOULD BE IN CLOSE PROXIMITY.
Work Hygienic Practices:USE GOOD HOUSEKEEPING PRACTICES TO PREVENT
ACCUMULATIONS OF DUST/TO KEEP AIRBORNE DUST CONCENTRATIONS AT A
MINIMUM.
Supplemental Safety and Health

Boiling Pt:B.P. Text:CORE: 250F
Spec Gravity:CORE: 1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:CORE: CLEAR SOLID AT ROOM TEMPERATURE WITH LIGHT
ROSIN ODOR.

Stability Indicator/Materials to Avoid:YES
MATERIAL MAY BE INCOMPATIBLE WITH ACIDS, BASES & OXIDIZERS. MOLTEN
METAL MAY REACT VIOLENTLY WITH WATER.
Hazardous Decomposition Products:TEMPERATURE ABOVE THE MELTING POINT
MAY EMIT TOXIC FUMES.

Waste Disposal Methods:SCRAP DRIPPINGS & DROSSES SHOULD BE STORED IN A
CLOSED CONTAINER & RETURNED TO A LEAD RECYCLER. FOLLOW FEDERAL,
STATE & LOCAL REGULATIOS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.