Product ID:FLOWSOLDER ALLOYS
MSDS Date:09/30/1988
FSC:3439
NIIN:01-009-6254
MSDS Number: BHBTY

FEDERATED-FRY METALS INC

6TH AVE & 41ST STREET
ALTOONA, PA 16602

Emergency Phone: 814-946-1611

Info Phone: 814-946-1611

Preparer: KEVIN WILLIAMS/DAN WEAVER

Cage: 65172

FRY TECHNOLOGY DIV OF COOKSON AMERICA INC

ALTOONA, PA 16602 US

Telephone: 814-946-1611

Cage: 65172

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 0-100%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 0-100%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 0-15%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

BISMUTH (.5% PER CTDF)

CAS: 7440-69-9

RTECS: EB2600000

Fraction By Weight: 0-60%

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 0-10%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:BY FAR THE GREATEST HEALTH HAZARD IS
INHALATION OF FUMES PRODUCED DURING USE OF THE PRODUCT.IN A
SOLDERING OPERATION. CONTACT RESULTS IN THERMAL BURNS. INGESTION IS
NOT LIKELY.
Explanation of Carcinogenicity:HMIS FOUND REFERENCE WHERE IARC LISTS
LEAD AS GROUP 2B.NTP LIST LEAD COMPOUNDS, NOT LEAD ITSELF.
Effects of Overexposure:EYES/SKIN: THERMAL BURNS FROM CONTACT WITH
MOLTEN SOLDER,OR DERMATITIS/IRRITATION ROM FUMES. INHALED:
RESPIRATORY IRRITATION,NAUSEA,DIZZINESS. ABOVE 900F,LEAD FUME
POISONING MAY PRODUCE ANEMIA,INSOMNI A,WEAKNESS,NAUSEAABDOMINAL
PAIN,KIDNEY & NERVOUS SYSTEM DISORDERS. INGESTED:NOT LIKELY.
Medical Cond Aggravated by Exposure:NONE STATED BY MFR

First Aid:SKIN/EYE: BURNS,FLUSH WITH WATER & IF SEVERE,GET MEDICAL
ATTENTION. IRRITATION /DERMATITIS,REMOVE FOM EXPOSURE,GET MEDICAL
ATTENTION. INHALED: REMOVE TO FRESH AIR, CONSULT A PHYSICIAN.
INGESTED: CALL POISON CONTROL CENTER IMMEDIATELY.

Flash Point:NONE
Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS WITH
FULL PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES,MAY EMIT HIGHLY
TOXIC FUMES(ESPECIALLY LEAD)

Spill Release Procedures:COOL TO SOLIDIFY THEN SCRAPE UP. BEWARE OF
FIRES CAUSED BY MOLTEN METAL,SPARKS,ETC.
Neutralizing Agent:NONE

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS.
Other Precautions:FOR INDUSTRIAL USE ONLY. KEEP OUT OFREACH OF
CHILDREN. DO NOT TAKE INTERNALLY.

Respiratory Protection:WEAR NIOSH METAL FUME RESPIRATOR IF EXPOSURE
EXCEEDS TLV.
Ventilation:PROVIDE GEERAL OR LOCAL EXHAUST TO MAINTAIN EXPOSURES BELOW
TLV.
Protective Gloves:MFR:NONE HMIS:PROTECT FROM THERMAL BURNS
Eye Protection:GOGGLES OR SAFETY GLASSES
Other Protective Equipment:NONE NORMALLY NEEDED.
Work Hygienic Practices:USE NORMAL CHEMICAL HYGIENE PRACTICES.(WASH
BEFORE EATING,DRINKING,SMOKING. DO NOT EAT,DRINK,SMOKE IN AREA OF
USE.)
Supplemental Safety and Health
MSDS IS FORM MFR'S GENERIC DATA. INGREDIENTS ARE TAKEN FROM CTDF.

HCC:N1
Boiling Pt:B.P. Text:360-620F
Spec Gravity:7.0-11.0
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL,ODORLESS.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,OXIDIZERS,REDUCING AGENTS,HALOGENS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES OF THE METAL
COMPONENTS(ESPECIALLY LEAD).

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.
ALLOY PORTION IS RECLAIMABLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.