BHBVK - LUBRICATING OIL 60,505-15W40

  • MSDS: BHBVK
  • Manufacturer: BATTENFIELD AMERICA INC
  • Product Name: LUBRICATING OIL 60,505-15W40
  • National Stock Number: 9150-01-152-4119
Product Identification

Product ID:LUBRICATING OIL 60,505-15W40
MSDS Date:04/17/1989
FSC:9150
NIIN:01-152-4119
MSDS Number: BHBVK

Responsible Party
BATTENFIELD AMERICA,INC.
1575 CLINT ST
BUFFALO, NY 14206

Emergency Phone: 716-822-8410

Info Phone: 716-822-8410

Preparer: THOMAS G. MUSILLI

Cage: KO105

Contractor
BATTENFIELD AMERICA,INC.
BUFFALO, NY 14206 US

Telephone: 716-822-8410

Cage: KO105

Ingredients

MINERAL OIL

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: 97.2%

OSHA PEL 5 MG/M3 OIL MIST

ACGIH TLV: 5 MG/M3 OIL MIST


LUBRIZOL 4837 (LUBRIZOL, CLEVELAND,OH)

Fraction By Weight: 9.00%


ACRYLIC COPOLYMER (ROHM & HAAS, PHILADELPHIA,PA)

Fraction By Weight: 0.20%


STYRENE-ISOPRENE COPOLYMER (LUBRIZOL,WILLOWICK,OH)

Fraction By Weight: 11.6%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MFR STATES"THIS PRODUCT HAS BEEN USED
FOR YEARS WITH NO KNOWN ILL EFFECTS." THE MOST LIKELY HEALTH HAZARD
IS INHALATION OF OIL MIST IN THE UNLIKELY EVENT THAT THE PRODUCT
BECOMES AN AIRBORNE MIST.
Effects of Overexposure:PRODUUCT MAY IRRITATE EYES,SKIN.UNDER NORMAL
USE,SHOULD NOT BE INHALED OR INGESTED.
Medical Cond Aggravated by Exposure:NONE

First Aid

First Aid:EYE:FLUSH WITH WATER FOR 15 MIN. SKIN:REMOVE CONTAMINATED
CLOTHING.WASH WITH SOAP & WATER. LAUNDER CLOTHING BEFORE REUSE.
INHALED:(HIGHLY UNLIKELY)REMOVE FROM EXPOSURE. GET MEDICAL CARE.
INGESTED:DO N OT INDUCE VOMITING GET MEDICAL CARE.

Fire Fighting

Flash Point Method:COC
Flash Point:440F/227C
Autoignition Temp:Autoignition Temp Text:470F
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM,SAND/EARTH,WATER
FOG
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS. WATER
MAY CAUSE FROTHING.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:RECOVER LIQUID IF POSSIBLE. ADSORB REMAINDER
WITH INERT MATERIAL.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:STORE AWAY FROM HEAT,SPARKS,OPEN
FLAMES.

Exposure Controls

Respiratory Protection:NONE EXPECTED TO BE NECESSARY. WEAR NIOSH/MSHA
RESPIRATOR IF EXPOSED ABOVE PEL OF OIL MIST.
Ventilation:NORMAL ROOM VENTILATION
Protective Gloves:NEOPRENE OR BUTYL
Eye Protection:SAFETY GLASSES,SPLASH GOGGLES
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE.
Supplemental Safety and Health

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:700F/371C
Spec Gravity:0.89
Solubility in Water:NIL
Appearance and Odor:FLUID OIL,BLAND ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT,IGNITION SOURCES SUCH AS SPARKS &
OPEN FLAME
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE

Disposal

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE.LOCAL REGULATIONS.
MFR SUGGESTS RECYCLE (PREFERRABLE) OR INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.