BHCDF - CUT-MAX 246

  • MSDS: BHCDF
  • Manufacturer: E F HOUGHTON AND CO
  • Product Name: CUT-MAX 246
  • National Stock Number: 9150-00D002531
Product Identification

Product ID:CUT-MAX 246
MSDS Date:09/26/1996
FSC:9150
NIIN:00D002531
MSDS Number: BHCDF

Responsible Party
E F HOUGHTON & CO
MADISON AND VAN BUREN AVE
VALLEY FORGE, PA 19482
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 215-666-4105

Preparer: ROBERT E WILLAMS

Cage: 73227

Contractor
HOUGHTON INTERNATIONAL INC
930 VALLEY FORGE, PA 19482-0930 US

Telephone: 610-666-4105

Cage: 73277

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED LIGHT

CAS: 64742-53-6

RTECS: PY8036000

Fraction By Weight: >60%

ACGIH TLV: 5 MG/M3 (OIL MIST)


SOLVENT REFINED HEAVY NAPHTHENIC DISTILLATE, PETROLEUM

CAS: 64741-96-4

RTECS: PY8040000

Fraction By Weight: 1-10%

OSHA PEL 5MG/CUM AS OIL MIST

ACGIH TLV: 5MG/CUM AS OIL MIST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALE: AVOID BREATHING PRODUCT
MISTS. BREATHING MISTS IN EXCESS OF THE TLV MAY CAUSE IRRITATION OF
UPPER RESPIRATORY TRACT. SKIN: MAY BE A SLIGHT IRRITANT TO
SENSITIVE SKIN ON PROLONGED CONTAC T. EYE: MILD IRRITANT.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.SEE HEALTH
HAZARDS.
Medical Cond Aggravated by Exposure:PERSONS WITH CHRONIC RESPIRATORY
DISEASE MAY SHOW INCREASED SYMPTOMS DUE TO IRRITATION.

First Aid

First Aid:INHAL: REMOVE TO SOURCE OF FRESH AIR. SKIN: WASH W/SOAP &
WATER. REMOVE CONTAMINATED CLOTHING AND WASH BEFORE REUSE. EYE:
FLUSH W/WATER 15 MINS. CONSULT PHYSICIAN. INGEST: DO NOT INDUCE
VOMITING; GIVE VEGETABLE OIL DEMULCENTS, CONSULT PHYSICIAN.

Fire Fighting

Flash Point Method:COC
Flash Point:325F,163C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:NONE- TREAT AS AN OIL FIRE.
Unusual Fire/Explosion Hazard:UPON COMBUSTION, MAY RELEASE FUMES OF
SULFUR OXIDES.

Accidental Release

Spill Release Procedures:APPLY DRY OIL ABSORBANT TYPE MATERIAL & SWEEP
UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH STRONG OXIDIZERS.
DO NOT STORE BELOW FREEZING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:REQUIRED ONLY IF TLV IS EXCEEDED.
Ventilation:EXHAUST TYPE IF MISTING; OTHERWISE GENERAL TYPE IS
SATISFACTORY.
Protective Gloves:RUBBER GLOVES.
Eye Protection:SAFETY GOGGLES OR SAFETY GLASSES/SHIELDS
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:HIGH
Vapor Pres:NIL
Vapor Density:10+
Spec Gravity:0.93
Evaporation Rate & Reference:NIL
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, DARK BROWN OIL; ODOR OF SULFURIZED OIL.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL: OXIDES OF CARBON, HYDROGEN
CHLORIDE.

Disposal

Waste Disposal Methods:FOLLOW PERTINENT REGULATIONS FOR DISPOSAL OF
WASTE PETROLEUM OIL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.