Product ID:ODORLESS SEMI-GLOSS ALKYD ENAMEL ALKYDPAINT
MSDS Date:12/01/1988
FSC:6810
NIIN:00-269-2536
MSDS Number: BHCJV

BIRK PAINT MANUFACTURERS,INC.

230 KEARNEY AVENUE
JERSEY CITY, NJ 07305
US

Emergency Phone: 201-434-8013

Info Phone: 201-434-8013

Cage: HO453

BIRK PAINT MANUFACTURERS,INC.

JERSEY CITY, NJ 07305 US

Telephone: 201-434-8013

Cage: HO453

MINERAL SPIRITS

CAS: 64741-65-7

Fraction By Weight: 23.0%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

OTHER COMPONENTS (TYPE NOT SPECIFIED)

Fraction By Weight: BALANCE

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF
EYES,SKIN,RESPIRATORY AND G.I. SYSTEM,CNS EFFECTS LIKE
HEADACHE,DIZZINESS,WEAKNESS,FATIGUE,NAUSEA,HEADACHE,POSSIBLE
UNCONSCIOUSNESS OR ASPHYXIATION,NAUSEA,VOMITING,DIARRHEA IN CASE
OF INGESTION,REDNESS OR TEARING OF EYESOR DRYING OR DEFATTING OF
SKIN. CHRONIC:DERMATITIS,RESPIRATORY PROBLEM.
Explanation of Carcinogenicity:DATA PER MSDS.
Effects of Overexposure:SEE HEALTH HAZARDS DATA.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS MAY BE
WORSEN.

First Aid:SKIN AND EYES:FLUSH WITH PLENTY OF WATER FOR ABOUT 15-20
MINUTES;SEEK MEDICAL HELP AS SOON AS POSSIBLE. INHALATION:REMOVE TO
FRESH AIR,CALL A PHYSICIAN IF NEEDED. INGESTION:DO NOT INDUCE
VOMITING;CALL A PHYSICIAN IMMEDIATELY.

Flash Point:100F/38C
Lower Limits:1.0
Extinguishing Media:DRY CHEMICAL,CO*2,FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:AVOID EXTREME HEAT;CAN IGNITE
EXPLOSIVELY.

Spill Release Procedures:USE PROPER PERSONAL PROTECTION;REMOVE ALL
IGNITION SOURCES;CONTAIN FREE LIQUID IF POSSIBLE. USE SUITABLE
INERT ABSORBENT MATERIAL AND RECOVER FOR PROPER DISPOSAL.

Handling and Storage Precautions:STORE IN COOL,DRY AND WELL VENTILATED
AREA.KEEP AWAY FROM HEAT,OPEN FLAMES.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
VAPORS/MIST IF ABOVE PEL/TLV.
Ventilation:LOCAL/GENERAL TO MAINTAIN PEL/TLV.
Protective Gloves:NEOPRENE.
Eye Protection:CHEMICAL GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING,EYE-WASH FACILITIES.
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN;DO NOT BREATHE
VAPORS/MIST;WASH THOROUGHLY AFTER EACH USE;DO NOT SMOKE IN WORK
AREA.
Supplemental Safety and Health

HCC:F4
Boiling Pt:B.P. Text:355-400F
Vapor Pres:4.0
Vapor Density:>1.0;AIR=1
Spec Gravity:1.32
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:ODORLESS SEMI-GLOSS ALKYD PAINT.
Percent Volatiles by Volume:23.0

Stability Indicator/Materials to Avoid:YES
OXIDIZERS,ACIDS,BASES & SELECTED AMINES.
Stability Condition to Avoid:EXTREME HEAT,SHOCK FROM DROPPING.
Hazardous Decomposition Products:CO*2,CO,VARIOUS HYDROCARBONS.

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.