BJBCZ - AHYDRON

  • MSDS: BJBCZ
  • Manufacturer: VIVADENT USA INC
  • Product Name: AHYDRON
  • National Stock Number: 6520-00F011094
Product Identification

Product ID:AHYDRON
MSDS Date:01/01/1987
FSC:6520
NIIN:00F011094
MSDS Number: BJBCZ

Responsible Party
VIVADENT USA INC
182 WHALES AVE
TONAWANDA, NY 14150

Emergency Phone: (716) 694-2333

Info Phone: (716) 694-2333

Cage: 6S143

Contractor
VIVADENT USA INC
304 TONAWANDA, NY 14151

Telephone: (716) 694-2333

Cage: 6S143

Ingredients

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 70%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 30%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATING TO THE EYES,
MUCOUS MEMBRANES & UPPER RESPIRATORY TRACT.
Explanation of Carcinogenicity:METHYLENE CHLORIDE IS CONSIDERED TO BE
AN ANIMAL CARCINOGEN.
Effects of Overexposure:INHALATION: IRRITATING TO THE EYES, MUCOUS
MEMBRANES & UPPER RESPIRATORY TRACT.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH W/PLENTY OF WATER
& SOAP, REMOVE CONTAMINATED CLOTHING. EYE: RINSE W/PLENTY OF WATER
UNTIL IRRITATION STOPS, SEEK MEDICAL CARE. INGESTION: SEEK MEDICAL
CARE .

Fire Fighting

Flash Point Method:CC
Flash Point:-19C
Lower Limits:2.2%
Upper Limits:12.8%
Extinguishing Media:CO2, DRY CHEMICAL POWDER, ALCOHOL OR POLYMER FOAM
Fire Fighting Procedures:WATER MAY BE EFFECTIVE FOR COOLING, BUT MAY
NOT EFFECT EXTINGUISHMENT. USE EXTINGUISHING MEDIA AS MENTIONED
ABOVE.
Unusual Fire/Explosion Hazard:HIGHLY FLAMMABLE, KEEP AWAY FROM HEAT &
SOURCES OF IGNITION - NO SMOKING.

Accidental Release

Spill Release Procedures:SHUT OFF ALL SOURCES OF IGNITION. COVER
W/CARBON ABSORBENT, TAKE UP & PLACE IN CLOSED CONTAINER. WASH SPILL
SITE AFTER MATERIAL PICKUP IS COMPLETE.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY & VENTILATED
PLACE. KEEP CONTAINERS CLOSED. AVOID CONDITIONS WHICH MAY RESULT IN
DISPERSION TO WATERS. DON'T EMPTY INTO DRAIN.
Other Precautions:USE REASONABLE CARE TO AVOID CONTACT W/SKIN, EYES &
MUCOUS MEMBRANES. DON'T BREATHE VAPOR.

Exposure Controls

Ventilation:LOCAL EXHAUST: RECOMMENDED
Eye Protection:RECOMMENDED
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:57F
Vapor Pres:240
Vapor Density:2
Spec Gravity:0.79
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR COLORLESS LIQUID, FRAGRANT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
BASES, OXIDIZING AGENTS, REDUCING AGENTS
Stability Condition to Avoid:HEAT, IGNITION SOURCES, PROTECT FROM
MOISTURE.
Hazardous Decomposition Products:MAY PRODUCE TOXIC FUMES

Disposal

Waste Disposal Methods:THE COMBUSTIBLE MATERIAL MAY BE BURNED IN A
CHEMICAL INCINERATOR. FEDERAL, STATE & LOCAL LAWS TAKE PRECEDENCE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.