Product ID:CLEAR/BLUE FILL-IT BASE
MSDS Date:03/01/1987
FSC:6520
NIIN:00F011143
MSDS Number: BJBGK

Emergency Phone: 610-252-1464

Info Phone: 610-252-1464

Preparer: L D HOCHHAUSER

Cage: 2W369

Telephone: 610-252-1464

Cage: 2W369

CYANOACRYLATE ESTER

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IMMEDIATE BONDING OF EYES, SKIN/MOUTH.
IRRITATING VAPORS.
Explanation of Carcinogenicity:NONE

First Aid:INGESTION: GIVE WATER & INDUCE VOMITING. EYES: IMMEDIATELY
FLUSH W/PLENTY OF COOL WATER. SKIN: AVOID PULLING APART BY FORCE.
APPLY ACCUSOLV/OTHER SUITABLE CYANOACRYLATES SOLVENT & SEPARATE
BONDED SKIN SLOWLY. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:COC
Flash Point:180F
Extinguishing Media:DRY CHEMICAL, CO2.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:LARGE QUANTITIES ABSORBED BY
CLOTHS/TISSUES MAY UNDERGO POLYMERIZATION & HEAT TO POINT OF
AUTOIGNITION.

Spill Release Procedures:AVOID SKIN CONTACT. FLUSH W/WATER TO HARDEN &
SCRAPE UP. SMALL: ABSORB W/WET PAPER/CLOTH.

Handling and Storage Precautions:STORE IN A COOL DRY AREA AWAY FROM
HEAT, OPEN FLAMES & SUNLIGHT. KEEP CONTAINERS CLOSED & WELL
SEPARATED FROM ACTIVATOR.
Other Precautions:STORAGE IN REFRIGERATOR WILL EXTEND SHELF LIFE. KEEP
OUT OF THE REACH OF CHILDREN. FOR LABORATORY USE ONLY.

Respiratory Protection:NONE
Ventilation:MECHANICAL: ACCEPTABLE.
Protective Gloves:POLYETHYLENE
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:EYE WASH STATION
Work Hygienic Practices:NORMAL LABORATORY GOOD HOUSEKEEPING PRACTICES
SHOULD BE FOLLOWED.
Supplemental Safety and Health

Boiling Pt:B.P. Text:149F
Vapor Pres:0.17
Vapor Density:>1
Spec Gravity:1.046
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR/BLUE VISCOUS LIQUID W/ACRID ODOR.

Stability Indicator/Materials to Avoid:YES
WATER, ACIDS, BASES & PEROXIDES.
Stability Condition to Avoid:HEAT, MOISTURE, SUNLIGHT, OPEN FLAMES.
Hazardous Decomposition Products:BY COMBUSTION: CO & NITROGEN OXIDE.
Conditions to Avoid Polymerization:HEAT, WATER, ACIDS, BASES &
PEROXIDES.

Waste Disposal Methods:DISPOSE OF AS CHEMICAL WASTE IN CLOSED METAL
CONTAINER IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.