Product ID:NEYORO 41
MSDS Date:01/01/1987
FSC:6520
NIIN:00F011165
MSDS Number: BJBHJ

J.M. NEY COMPANY

NEY INDUSTRIAL PARK
BLOOMFIELD, CT 06002

Emergency Phone: (203) 242-2281

Info Phone: (203) 242-2281

Cage: FO552

NEY J M CO DENTAL DIVISION

BLOOMFIELD, CT 06002 US

Telephone: (203) 242-2281

Cage: 6M651

ZINC (SARA III)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 3.5%

OSHA PEL 10 MG ZNO/M3

ACGIH TLV: 10 MG ZNO/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 38.5%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: GRAY PIGMENTATION, IRRITATION,
CUTS, & BURNS. INHALATION: PULMONARY SYSTEM EFFECTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: GRAY PIGMENTATION, IRRITATION, CUTS, &
BURNS. INHALATION: PULMONARY SYSTEM EFFECTS.

First Aid:INHALATION: REMOVE FROM EXPOSURE & OBTAIN PROMPT MEDICAL
ATTENTION.

Unusual Fire/Explosion Hazard:ZINC & SILVER - MODERATE FIRE HAZARD.

Spill Release Procedures:IF LARGE QUANTITIES OF DUST ARE GENERATED, USE
INDUSTRIAL VACUUM TO CLEAN UP. MOLTEN METAL SHOULD BE ALLOWED TO
SOLIDIFY BEFORE CLEAN UP.

Handling and Storage Precautions:AVOID CUTS & BURNS. WEAR PROTECTIVE
EQUIPMENT WHEN CUTTING, GRINDING, SOLDERING, WELDING, MELTING,
MACHINING, & HANDLING OF NON-FERROUS METALS.

Respiratory Protection:IN ACCORDANCE WITH NIOSH WHEN CUTTING, GRINDING,
SOLDERING, & WELDING.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION WHEN GENERATING DUST,
MIST, & FUMES TO KEEP Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health

Appearance and Odor:SOLID METAL, WIRE, PLATE/STRIP/INGOTS/NUGGETS,
SWITCHES, ELECTRONIC/DENTAL FORM

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES

Waste Disposal Methods:DISPOSAL OF DUST USING APPROVED METHODS
CONSISTANT W/APPLICABLE LOCAL, STATE, & FEDERAL REGULATIONS. MOLTEN
METAL SHOULD BE RECLAIMED USING STANDARD INDUSTRIAL PRACTICES SUCH
AS REMELTING & REFINING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.