Product ID:DYNA-BOND PLUS CATALYST PRIMER
MSDS Date:02/01/1988
FSC:6520
NIIN:00F011197
MSDS Number: BJBJV

UNITEK CORPORATION

2724 SOUTH PECK ROAD
MONROVIA, CA 91016

Emergency Phone: (818) 574-4000

Info Phone: (818) 574-4000

Cage: 90444

UNITEK CORPORATION

MONROVIA, CA 91016-5005

Telephone: (213) 445-7960

Cage: 90444

BISPHENOL A GLYCIDYLMETHACRYLATE, BIS-GMA

CAS: 1565-94-2

RTECS: UD3438000

TRIETHYLENE GLYCOL DIMETHACRYLATE

CAS: 109-16-0

RTECS: OZ4100000

BENZOYL PEROXIDE, DI-BENZOYLPEROXIDE

CAS: 94-36-0

RTECS: DM8575000

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: MAY CAUSE MINOR
IRRITATION/REDNESS. SKIN: PROLONGED/REPEATED CONTACT TO
UNPOLYMERIZED MATERIAL MAY CAUSE IRRITATION & ALLERGIC
SENSITIZATION. INGESTION: MAY BE A SLIGHT HEALTH HAZARD.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE: MAY CAUSE MINOR IRRITATION & REDNESS.
SKIN: PROLONGED/REPEATED CONTACT TO UNPOLYMERIZED MATERIAL MAY
CAUSE IRRITATION & ALLERGIC SENSITIZATION. INGESTION: THIS MATERIAL
MAY BE A SLIGHT HEALTH HAZ ARD.
Medical Cond Aggravated by Exposure:ALLERGIC SENSITIZATION

First Aid:EYE: WASH W/LARGE QUANTITIES OF LUKEWARM WATER FOR 15
MINUTES. CONTACT PHYSICIAN. SKIN: WASH W/SOAP & WATER THEN FLUSH
W/LUKEWARM WATER FOR 15 MINUTES. INGESTION: CONSULT PHYSICIAN.

Flash Point:>240F
Extinguishing Media:DRY CHEMICAL, CO2, FOAM
Unusual Fire/Explosion Hazard:LARGE CONTAINERS OF BULK MATERIAL MAY
RUPTURE EXPLOSIVELY WHEN EXPOSED TO HEAT. SEALED CONTAINERS MAY
RUPTURE EXPLOSIVELY.

Spill Release Procedures:CLEAN UP SMALL SPILLS WITH PAPER TOWELS.

Handling and Storage Precautions:STORE IN A COOL <75F, DARK PLACE.

Respiratory Protection:GENERALLY NOT REQUIRED UNDER NORMAL CONDITIONS
OF USE.
Ventilation:GENERAL AREA VENTILATION
Eye Protection:AS NECESSARY TO PREVENT EXCESSIVE
Supplemental Safety and Health

Spec Gravity:1.1
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:SLIGHT
Appearance and Odor:VISCOUS, TRANSLUCENT, AMBER LIQUID, MILD ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, PEROXIDES, STRONG ALKALIES
Stability Condition to Avoid:HEAT, DIRECT SUNLIGHT, OPEN FLAMES &
STORAGE >100F.
Hazardous Decomposition Products:TOXIC FUMES

Waste Disposal Methods:BASE PRIMER/CATALYST PRIMER SHOULD BE
MIXED/ALLOWED TO GEL & CURE. USE PROPER LANDFILL DISPOSAL OR
INCINERATION. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.