BJBMK - SMG-Y
- MSDS: BJBMK
- Manufacturer: J M NEY COMPANY
- Product Name: SMG-Y
- National Stock Number: 6520-00F012042
Product Identification
Product ID:SMG-Y
MSDS Date:01/01/1987
FSC:6520
NIIN:00F012042
MSDS Number: BJBMK
Responsible Party
BLOOMFIELD, CT 06002
Emergency Phone: (203) 242-2281
Info Phone: (203) 242-2281
Cage: FO552
Contractor
Telephone: 800-243-1942/203-242-2281
Cage: 43710
Ingredients
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 2.2%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DUST OF TIN OXIDES HAVE
CAUSED RELATIVELY BENIGN PNEUMOCONIOSIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DUST OF TIN OXIDES HAVE CAUSED
RELATIVELY BENIGN PNEUMOCONOSIS.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE & OBTAIN PROMPT MEDICAL
ATTENTION.
Fire Fighting
Flash Point:NON-FLAMMBLE
Accidental Release
Spill Release Procedures:IF LARGE QUANTITIES OF DUST ARE GENERATED, USE
INDUSTRIAL VACUUM TO CLEAN UP. MOLTEN METAL SHOULD BE ALLOWED TO
SOLIDIFY BEFORE CLEAN UP.
Handling
Handling and Storage Precautions:PROVIDE PROTECTIVE EQUIPMENT WHEN
CUTTING, GRINDING, SOLDERING, WELDING, MELTING, MACHINING, &
HANDLING OF NON-FERROUS METALS.
Exposure Controls
Respiratory Protection:WEAR CUTTING, GRINDING, SOLDERING OR WELDING.
Ventilation:LOCAL EXHAUST TO KEEP DUST, MIST OR FUMES
Eye Protection:RECOMMENDED
Supplemental Safety and Health
ALLOYS PRODUCTS ARE SOLID MEALS SHAPED AS WIRE, PLATE, STRIP OR IN
FINISHED FORMS AS INGOTS, NUGGETS, ELECTRICAL CONTACT ASSEMBLIES,
SWITCHES, OR AS OTHER FORMS FOR ELECTRONIC & DENTAL USE.
Chemical Properties
Solubility in Water:NONE
Appearance and Odor:SOLID METALS-WIRE, PLATE, STRIP, INGOTS, NUGGETS.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:WELDING FUMES
Disposal
Waste Disposal Methods:DISPOSAL OF DUST USING APPROVED METHODS
CONSISTANT W/APPLICABLE LOCAL, STATE, & FEDERAL REGULATIONS. MOLTEN
METAL SHOULD BE RECLAIMED USING STANDARD INDUSTRIAL PRACTICES SUCH
AS REMELTING & REFINING.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.