BJBML - COIN GOLD

  • MSDS: BJBML
  • Manufacturer: J M NEY COMPANY
  • Product Name: COIN GOLD
  • National Stock Number: 6520-00F012043
Product Identification

Product ID:COIN GOLD
MSDS Date:01/01/1987
FSC:6520
NIIN:00F012043
MSDS Number: BJBML

Responsible Party
J.M. NEY COMPANY
NEY INDUSTRIAL PARK
BLOOMFIELD, CT 06002

Emergency Phone: (203) 242-2281

Info Phone: (203) 242-2281

Cage: FO552

Contractor
NEY DENTAL INCORPORATED
BLOOMFIELD, CT 06002-5000 US

Telephone: 800-243-1942/203-242-2281

Cage: 43710

Ingredients

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 10%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: GASTROINTESTINAL TRACTS
EFFECTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: GASTROINTESTINAL TRACT EFFECTS.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE & OBTAIN PROMPT MEDICAL
ATTENTION.

Accidental Release

Spill Release Procedures:IF LARGE QUANTITIES OF DUST ARE GENERATED, USE
INDUSTRIAL VACUUM TO CLEAN UP. MOLTEN METAL SHOULD BE ALLOWED TO
SOLIDIFY BEFORE CLEAN UP.

Handling

Handling and Storage Precautions:PROVIDE PROTECTION EQUIPMENT WHEN
CUTTING, GRINDING, SOLDERING, WELDING, MELTING, MACHINING, &
HANDLING OF NON-FERROUS METALS.

Exposure Controls

Respiratory Protection:WEAR WHEN CUTTING, GRINDING, SOLDERING OR
WELDING.
Ventilation:LOCAL EXHAUST TO KEEP DUST, MIST OR FUMES Protective Gloves:RECOMMENDED WHEN GRINDING OR MELTING
Eye Protection:RECOMMENDED
Supplemental Safety and Health
ALLOY PRODUCTS ARE SOLID METALS SHAPED AS WIRE, PLATE, STRIP OR IN
FINISHED FORMS AS INGOTS, NUGGETS, ELECTRICAL CONTACT ASSEMBLIES,
SWITCHES, OR AS OTHER FORMS FOR ELECTRONICS & DENTAL USE.

Chemical Properties

Appearance and Odor:SOLID METALS-WIRE, PLATE, STRIP, INGOTS, NUGGETS.

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:WELDING FUMES

Disposal

Waste Disposal Methods:DISPOSAL OF DUST USING APPROVED METHODS
CONSISTANT W/APPLICABLE LOCAL, STATE, & FEDERAL REGULATIONS. MOLTEN
METAL SHOULD BE RECLAIMED USING STANDARD INDUSTRIAL PRACTICES SUCH
AS REMELTING & REFINING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.