BJBVN - BUFFALO WAX REMOVER

  • MSDS: BJBVN
  • Manufacturer: BUFFALO DENTAL MFG CO INC
  • Product Name: BUFFALO WAX REMOVER
  • National Stock Number: 6520-00F012172
Product Identification

Product ID:BUFFALO WAX REMOVER
MSDS Date:05/05/1988
FSC:6520
NIIN:00F012172
MSDS Number: BJBVN

Responsible Party
BUFFALO DENTAL MFG. CO., INC.
575 UNDERHILL BLVD.
SYOSSET, NY 11791

Emergency Phone: (516) 496-7200

Info Phone: (516) 496-7200

Cage: 09496

Contractor
BUFFALO DENTAL MFG CO INC
SYOSSET, NY 11791-3416 US

Telephone: 516-496-7200

Cage: 09496

Ingredients

D-LIMONENE, 4-ISOPROPENYL-1-METHYLCYCLOHEXANE

CAS: 5989-27-5

RTECS: GW6360000

Fraction By Weight: 95%

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT): 5 G/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL, NAUSEA. EYE:
DAMAGE & IRRITATION. SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: HARMFUL, NAUSEA. EYE: DAMAGE &
IRRITATION. SKIN: IRRITATION.

First Aid

First Aid:SKIN: WASH IMMEDIATELY W/SOAP & WATER. GET MED ATT. EYES:
FLUSH W/WATER FOR AT LEAST 15 MINUTES. GET MED ATT.

Fire Fighting

Flash Point Method:TCC
Flash Point:115F
Lower Limits:0.7%
Upper Limits:6.1%
Extinguishing Media:DRY POWDER, FOAM, CO2
Fire Fighting Procedures:CLASS B FIRE PROCEDURES.
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID. KEEP AWAY FROM HEAT,
SPARKS & FLAME.

Accidental Release

Spill Release Procedures:SMALL SPILLS CAN BE ABSORBED BY DIRT, SAND OR
OTHER SUITABLE ABSORBANTS FOR DISPOSAL. CAUTION NEEDED AS FLOOR MAY
BECOME SLIPPERY. DIKE LARGE SPILL W/DIRT, THEN PUMP TO CONTAINER OR
TANK TRUCK FOR DIS POSAL.

Handling

Handling and Storage Precautions:USUAL PRECAUTIONS FOR COMBUSTIBLE
LIQUIDS.
Other Precautions:ALL HANDLING EQUIPMENT SHOULD BE ELECTRICALLY
GROUNDED.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED UNLESS VAPOR CONCENTRATION
BECOMES HIGH. THEN USE SELF CONTAINED AIR MASK.
Ventilation:LOCAL EXHAUST VENTILATION SHOULD BE ADEQUATE.
Protective Gloves:CHEMICALLY RESISTANT
Eye Protection:CHEMICAL SPLASH GOGGLES, FACE SHIELD
Other Protective Equipment:USUALLY NOT NEEDED
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:310F
Vapor Pres:1
Vapor Density:4.69
Spec Gravity:0.840
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:SLIGHT TO CLEAR W/CITRUS ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS & FLAME
Conditions to Avoid Polymerization:POLYMERIZATION CATALYSTS SUCH AS
ALUMINUM CHLORIDE

Disposal

Waste Disposal Methods:DISPOSE IN LANDFILL APPROVED FOR USE, AWAY FROM
WATER SUPPLIES. BURNING IS ALTERNATE METHOD. OBSERVE ALL LOCAL,
STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.