BJBXV - FORMO CRESOL

  • MSDS: BJBXV
  • Manufacturer: HENRY SCHEIN INC
  • Product Name: FORMO CRESOL
  • National Stock Number: 6850-00F012219
Product Identification

Product ID:FORMO CRESOL
MSDS Date:01/01/1987
FSC:6850
NIIN:00F012219
MSDS Number: BJBXV

Responsible Party
HENRY SCHEIN INC
5 HARBOR PARK DRIVE
PORT WASHINGTON, NY 11050

Emergency Phone: (516) 621-43000

Info Phone: (516) 621-43000

Cage: 64682

Contractor
HENRY SCHEIN INC
PORT WASHINGTON, NY 11050

Telephone: (516) 621-4300

Cage: 64682

Ingredients

FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: 48.5%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


CRESOL, ALL ISOMERS (CRESYLIC ACID) (SARA III)

CAS: 1319-77-3

RTECS: GO5950000

Fraction By Weight: 48.5%

OSHA PEL S, 5 PPM

ACGIH TLV: S, 5 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAUSES TEARING & SEVERE
IRRITATION. INHALATION: IRRITATION TO RESPIRATORY TRACT. INGESTION:
STOMACH PAIN, & PULMONARY EDEMA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: CAUSE TEARING & SEVERE IRRITATION.
INHALATION: IRRITATION TO RESPIRATORY TRACT. INGESTION: STOMACH
PAIN, & PULMONARY EDEMA.

First Aid

First Aid:EYES/SKIN: FLUSH W/WATER FOR 15 MINS. INHALATION: REMOVE FROM
CONTAMINATED AREA & USE OXYGEN IF NEEDED.

Fire Fighting

Flash Point Method:PMCC
Flash Point:154F
Extinguishing Media:FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:USE AIR-SUPPLIED RESCUE EQUIPMENT FOR ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:DON'T PRESSURIZE, CUT, HEAT, WELD OR
EXPOSE SUCH CONTAINERS TO FLAME.

Accidental Release

Spill Release Procedures:USE FOAM TO CONTROL VAPORS. FLUSH AREA W/WATER
SPARINGLY & USE ABSORBANTS TO CONTAIN/REMOVE SPILLS. NEUTRALIZE
W/AMMONIA & COMPLEX W/SODIUM SULFITE.
Neutralizing Agent:AMMONIA, SODIUM SULFITE.

Handling

Handling and Storage Precautions:STORE IN CLOSED CONTAINERS & LABEL
CORROSIVE. AVOID CONTACT W/SKIN.

Exposure Controls

Respiratory Protection:FULL-FACE NIOSH APPROVED FORMALDEHYDE & ACID GAS
CARTRIDGE.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL: NOT RECOMMENDED.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:IMPERVIOUS BODY COVERING/BOOTS.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:392F
Vapor Pres:1.0
Vapor Density:NIL
Spec Gravity:1.058
pH:4.05
Evaporation Rate & Reference:(BU AC = 1): 0.3
Solubility in Water:MISCIBLE
Appearance and Odor:BROWN COLORED LIQUID W/PUNGENT ODOR.
Percent Volatiles by Volume:38

Stability

Stability Indicator/Materials to Avoid:YES
CAUSTICS, STRONG ALKALIES, ISOCYANATES, ANHYDRIDES, INORGANIC ACIDS
Stability Condition to Avoid:HIGH TEMPERATURES, HEAT
Hazardous Decomposition Products:FORMALDEHYDE GAS, CO

Disposal

Waste Disposal Methods:INCINERATION, BIOLOGICAL OXIDATION W/PROPER
ACCLAIMATION OF SYSTEM, LANDFILL ONLY IF SOLIDIFIED PRIOR TO
DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.