BJCBJ - PERIPHERAL SEAL LIQUID
- MSDS: BJCBJ
- Manufacturer: DENTSPLY INTERNATIONAL INC
- Product Name: PERIPHERAL SEAL LIQUID
- National Stock Number: 6520-00F012259
Product Identification
Product ID:PERIPHERAL SEAL LIQUID
MSDS Date:09/12/1985
FSC:6520
NIIN:00F012259
MSDS Number: BJCBJ
Responsible Party
YORK, PA 17405
Emergency Phone: (717) 845-7591
Info Phone: (717) 845-7591
Cage: 8T797
Contractor
Telephone: 717-845-7511
Cage: 16969
Ingredients
N,N-DIMETHYL-P-TOLUIDINE, DIMETHYL-P-TOLUIDINE
CAS: 99-97-8
RTECS: XU5803000
Fraction By Weight: 2.5%
ACGIH TLV: 5 PPM
BUTYL METHACRYLATE
CAS: 97-88-1
RTECS: OZ3675000
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: SENSITIVE. EYES: IRRITATION.
INHALATION: RESPIRATORY SYSTEM IRRITATION, NARCOSIS, DIZZINESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: SENSITIVE. EYES: IRRITATION. INHALATION:
NARCOSIS, DIZZINESS, & RESPIRATORY SYSTEM IRRITATION.
First Aid
First Aid:EYES: IRRIGATE W/PLENTY OF WATER & SEEK MEDICAL ATTENTION.
INHALATION: REMOVE TO FRESH AIR & SEEK MEDICAL ATTENTION. IF
SYMPTOMS PERSIS. SKIN: WASH WITH SOAP & WATER.
Fire Fighting
Flash Point Method:PMCC
Flash Point:120F
Lower Limits:2%
Upper Limits:8%
Extinguishing Media:FOAM, CO2, SAND, FIRE WATER SPRAY
Unusual Fire/Explosion Hazard:MAY CAUSE TOXIC FUMES
Accidental Release
Spill Release Procedures:ABSORB INTO SAND OR EARTH. TURN OFF ALL
SOURCES OF IGNITION, VENTILATE AREA.
Handling
Handling and Storage Precautions:STORE <25C. AVOID CONTACT W/SKIN &
EYES, FOODSTUFFS.
Exposure Controls
Respiratory Protection:SELF CONTAINED FOR BULK USAGE.
Ventilation:LOCAL EXHAUST: PREFERRED
Protective Gloves:SOLVENT RESISTANT
Eye Protection:GOGGLES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:326F
Vapor Pres:2
Vapor Density:4.8
Spec Gravity:0.9
Solubility in Water:SLIGHT
Appearance and Odor:COLORLESS TO LIGHT YELLOW MOBILE LIQUID
W/DISTINCTIVE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EXCESSIVE STORAGE TEMPERATURES >35C,
SOURCES OF IGNITION.
Hazardous Decomposition Products:TOXIC FUMES
Disposal
Waste Disposal Methods:INCINERATE IN APPROPRIATE CONTAINER - SEEK
PROFESSIONAL DISPOSAL FOR QUANTITY - CHECK LOCAL ENVIRONMENTAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.