BJCBM - SNAP GLAZE S422
- MSDS: BJCBM
- Manufacturer: PARKELL
- Product Name: SNAP GLAZE S422
- National Stock Number: 6520-00F012263
Product Identification
Product ID:SNAP GLAZE S422
MSDS Date:01/04/1989
FSC:6520
NIIN:00F012263
MSDS Number: BJCBM
Responsible Party
FARMINGDALE, NY 11735
Emergency Phone: (800) 541-5624
Info Phone: (516) 249-1134
Cage: 24040
Contractor
Telephone: (516) 249-1134
Cage: 24040
Ingredients
ACRYLIC COPOLYMER
Fraction By Weight: 30%
RESIDUAL MONOMER
Fraction By Weight: 1%
PROPYLENE GLYCOL METHYL ETHER ACETATE
Fraction By Weight: 70%
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 85%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TRADE SECRET COMPONENT
Fraction By Weight: 15%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, & HEADACHE,
SKIN: DRY & DERMATITIS. INGESTION: IRRITATING RESPIRATORY TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: IRRITATING RESPIRATORY TRACT.
INHALATION: DIZZINESS, HEADACHES. SKIN: DRY & DERMATITIS
Medical Cond Aggravated by Exposure:DERMATITIS
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE
VOMITING. SKIN: WASH HANDS W/SOAP & WATER.
Fire Fighting
Flash Point Method:TCC
Flash Point:21F
Extinguishing Media:WATER FOG, CO2, DRY CHEMICAL, FOAM
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. CONTAIN
SPILL: IF CONTAINER IS DAMAGED TRANSFER TO CLOSED LINED METAL,
GLASS OR PLASTIC CONTAINER. USE ABSORBENT MATERIAL TO COLLECT &
CONTAIN FOR SALVAGE OR DISPOSA L.
Handling
Handling and Storage Precautions:LIMIT STORAGE OF COMBUSTIBLE MATERIAL
TO APPROVED AREAS. GROUND ALL CONTAINERS W/TRANSFERRING MATERIAL.
Exposure Controls
Respiratory Protection:MASK NOT REQUIRED, IF USED, SHOULD BE TYPE FOR
ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST: EXPLOSIVE PROOF. MECHANICAL: ACCEPTABLE
Protective Gloves:IMPERVIOUS RUBBER, PLASTIC
Eye Protection:CHEMICAL SPLASH GOGGLES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:170F
Vapor Density:1
Spec Gravity:0.8
Evaporation Rate & Reference:(BU AC = 1): 1
Solubility in Water:MODERATE
Appearance and Odor:CLEAR, COLORLESS, FRUITY ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
CAUSTICS, AMINES, ALKANOLAMINES, ALDEHYDES, AMMONIA, STRONG OXIDIZING
AGENTS.
Disposal
Waste Disposal Methods:AXEL PLASTICS SUGGEST THAT ALL LOCAL, STATE &
FEDERAL REGULATIONS CONCERNING HEALTH & POLLUTION BE REVIEWED FOR
APPROVED PROCEDURE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.