BJCDN - CARBON/GRAPHITE W/COPPER
- MSDS: BJCDN
- Manufacturer: AIRCO WELDING PRODUCTS DIV OF BOC GROUP INC
- Product Name: CARBON/GRAPHITE W/COPPER
- National Stock Number: 3439-00F012306
Product Identification
Product ID:CARBON/GRAPHITE W/COPPER
MSDS Date:11/01/1985
FSC:3439
NIIN:00F012306
MSDS Number: BJCDN
Responsible Party
NEW PROVIDENCE, NJ 07974-2006
US
Emergency Phone: 908-771-1381
Info Phone: 908-771-1381
Cage: 83923
Contractor
Telephone: 908-665-2400
Cage: 6S493
Ingredients
GRAPHITE
CAS: 7782-42-5
RTECS: MD9659600
Fraction By Weight: <85-95%
OSHA PEL 15 MPPCF
ACGIH TLV: 2 MG/CUM RESP IC
COPPER (DUST & MIST), BRONZE POWDER *97-2*
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 5-60%
OSHA PEL 0.1 MG(CU)/M3 (FUME)
ACGIH TLV: 0.2 MG/M3 (FUME)
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CARBON, ACTIVATED CARBON, GRAPHITE
CAS: 7440-44-0
RTECS: FF5250100
Fraction By Weight: <30%
OSHA PEL 10 MG/CUM
ACGIH TLV: 10 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE MECHANICAL IRRITATION
AT HIGH DUST LEVEL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, TEMPORARY SKIN DISCOLORATION, METAL
FUME FEVER, METALLIC TASTE.
Medical Cond Aggravated by Exposure:PRE-EXISTING CHRONIC RESPIRATORY
IMPAIRMENTS, SERUM ANTITRYPSIN DEFICIENCY, WILSON'S DISEASE.
First Aid
First Aid:SKIN: WASH OFF. EYES: FLUSH W/WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:WATER, CO2, SAND.
Fire Fighting Procedures:WEAR A SCBA.
Unusual Fire/Explosion Hazard:DUST FROM THIS MIXTURE MAY WEAKLY
CONTRIBUTE TO EXPLOSION IF INITIATED BY ANOTHER EXPLOSIVE DUST/GAS.
DUST ACCUMULATIONS MAY CAUSE ELECTRICAL SHORT-CIRCUITS.
Accidental Release
Spill Release Procedures:USE NORMAL HOUSEKEEPING PROCEDURES.
Exposure Controls
Respiratory Protection:WEAR AN APPROVED RESPIRATOR IF EXPOSURE EXCEEDS
PEL.
Ventilation:LOCAL EXHAUST: RECOMMENDED IF DUST LEVEL EXCEEDS PELS.
Protective Gloves:NOT REQUIRED
Eye Protection:IF AIRBORNE PARTICLES ARE PRODUCED
Other Protective Equipment:NONE REQUIRED
Supplemental Safety and Health
BOILING POINT, MELTING POINT & SPECIFIC GRAVITY INFORMATION IS FOR
COPPER.
Chemical Properties
Boiling Pt:B.P. Text:4172F
Melt/Freeze Pt:M.P/F.P Text:1981.4F
Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Spec Gravity:8.9 (SEE SUPP)
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY-COPPER COLORED SOLID W/NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:BY NORMAL COMBUSTION: CO, CO2, COPPER
FUME, COPPER OXIDE.
Disposal
Waste Disposal Methods:BURY IN AN APPROVED LANDFILL IAW/FEDERAL, STATE
& LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.