BJCHY - ORTHOSIL SILICONE GEL 617H43/617H44
- MSDS: BJCHY
- Manufacturer: OTTO BOCK ORTHOPEDIC INDUSTRY INC
- Product Name: ORTHOSIL SILICONE GEL 617H43/617H44
- National Stock Number: 6520-00F012381
Product Identification
Product ID:ORTHOSIL SILICONE GEL 617H43/617H44
MSDS Date:12/01/1987
FSC:6520
NIIN:00F012381
MSDS Number: BJCHY
Responsible Party
MINNEAPOLIS, MN 55441
US
Emergency Phone: 800-328-4058
Info Phone: 800-328-4058
Cage: 1FE17
Contractor
Telephone: (800) 328-4058
Cage: 1FE17
Ingredients
DIMETHYL SILOXANE),
CAS: 63148-62-9
RTECS: JT6484500
FILLERS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SLIGHT IRRITATION. INHALATION:
MUCOUS MEMBRANE IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION
First Aid
First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINUTES. CONSULT
DOCTOR. SKIN: REMOVE PRODUCT W/CLOTH. WASH W/SOAP & WATER.
INGESTION: ALLOW VICTIM TO VOMIT NATURALLY. CONSULT DOCTOR. OBTAIN
MEDICAL ATTEN TION IN ALL CASES.
Fire Fighting
Flash Point:>482F
Extinguishing Media:FOAM, SAND, CO2
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:EXPLOSIVE LIMITS FOR HYDROGEN/AIR
MIXTURES ARE 4.0-75.6 VOL.
Accidental Release
Spill Release Procedures:REMOVE MECHANICALLY. TRACES MAY BE REMOVED
W/MINERAL SPIRITS.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED & STORED
IN A COOL PLACE. EMPTY CONTAINERS CAREFULLY.
Exposure Controls
Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST/MECHANICAL
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES
Work Hygienic Practices:NO SPECIAL PRECAUTIONS ARE NECESSARY.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.0
pH:7
Solubility in Water:<0.1
Appearance and Odor:VISCOUS, CLEAR, ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
ALKALIES, AMINES, METAL SALTS, WATER, ALCOHOL, STRONG OXIDANTS,
HYDROGENS FINELY POWDERED METALS, & ACIDS
Hazardous Decomposition Products:SILICON DIOXIDE, CO2; THERMAL
DECOMPOSITION: >392F.
Disposal
Waste Disposal Methods:UNVULCANIZED SILICONE GEL MUST BE DISPOSED OF
THROUGH BURNING AT APPROVED WASTE INCINERATION PLANTS FOR SPECIAL
WASTE ACCORDING TO LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.