BJCLJ - ORTHO-BOND A
- MSDS: BJCLJ
- Manufacturer: VERNON BENSHOFF COMPANY
- Product Name: ORTHO-BOND A
- National Stock Number: 6520-00F012415
Product Identification
Product ID:ORTHO-BOND A
MSDS Date:09/01/1986
FSC:6520
NIIN:00F012415
MSDS Number: BJCLJ
Responsible Party
ALBANY, NY 12207
Emergency Phone: (518) 434-3147
Info Phone: (518) 434-3147
Cage: 31968
Contractor
Cage: 31968
Ingredients
N-BUTYL GLYCIDYL ETHER (BGE)
CAS: 2426-08-6
RTECS: TX4200000
Fraction By Weight: 12%
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM; 9293
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: PROLONGED/REPEATED CONTACT MAY
CAUSE RASH.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: PROLONGED/REPEATED CONTACT MAY CAUSE
RASH/SENSITIZER.
Medical Cond Aggravated by Exposure:RASH/SENSITIZATION
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH THOROUGHLY W/SOAP &
WATER. REMOVE CONTAMINATED CLOTHING.
Fire Fighting
Flash Point Method:TOC
Flash Point:200F
Lower Limits:0.4%
Upper Limits:1.3%
Extinguishing Media:USE CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:COVER W/ABSORBENT MATERIAL, & PHYSICIALLY
REMOVE TO WASTE CONTAINER.
Handling
Handling and Storage Precautions:AVOID BREATHING OF VAPORS. USE
ADEQUATE VENTILATION. KEEP DRY. STORE IN METAL CONTAINERS. AVOID
STORAGE AT HIGH TEMPERATURES 100F.
Exposure Controls
Respiratory Protection:AIR-SUPPLIED MASK IN CONFINED AREA.
Ventilation:MECHANICAL: PREFERRED
Protective Gloves:PLASTIC
Eye Protection:MONOGOGGLES
Other Protective Equipment:EYE BATH & SAFETY SHOWER.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health
Chemical Properties
Vapor Pres:2
Vapor Density:3.78
Spec Gravity:1.12-1.14
Solubility in Water:1
Appearance and Odor:CLEAR; SWEET; PLEASANT ODOR.
Percent Volatiles by Volume:15%
Stability
Stability Indicator/Materials to Avoid:YES
HYDROGENS, PHENOL, ACID, BASE & AMINES
Stability Condition to Avoid:STORAGE HIGH TEMPERATURE 100F.
Hazardous Decomposition Products:CO, CO2
Disposal
Waste Disposal Methods:INCINERATE IN A FURNACE. IN ACCORDANCE
W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.