BJCSB - FORMO CRESOL
- MSDS: BJCSB
- Manufacturer: RUGBY LABORATORIES INC
- Product Name: FORMO CRESOL
- National Stock Number: 6505-01-145-5220
Product Identification
Product ID:FORMO CRESOL
MSDS Date:01/20/1986
FSC:6505
NIIN:01-145-5220
MSDS Number: BJCSB
Responsible Party
WEST HEMPSTEAD, NY 11552
Emergency Phone: (800) 645-2158
Info Phone: (800) 645-2158
Cage: 4V824
Contractor
Telephone: 800-537-3175
Cage: 4V824
Ingredients
CRESOL, ALL ISOMERS (CRESYLIC ACID) (SARA III)
CAS: 1319-77-3
RTECS: GO5950000
OSHA PEL S, 5 PPM
ACGIH TLV: S, 5 PPM; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
FORMALDEHYDE (SARA III)
CAS: 50-00-0
RTECS: LP8925000
OSHA PEL SEE 1910.1048
ACGIH TLV: C 0.3 PPM; A2; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: TEARING & SEVERE IRRITATION.
INHALATION: HIGHLY IRRITATING TO UPPER RESPIRATORY TRACT &
PULMONARY EDEMA. INGESTION: STOMACH PAIN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE: TEARING & SEVERE IRRITATION. INHALATION:
HIGHLY IRRITATING TO UPPER RESPIRATORY TRACT/PULMONARY EDEMA.
INGESTION: STOMACH PAIN.
First Aid
First Aid:EYE/SKIN: FLUSH W/WATER FOR 15 MINUTES. INHALATION: REMOVE
PATIENT FROM CONTAMINATED AREA; THEN OXYGEN IF NEEDED.
Fire Fighting
Flash Point Method:PMCC
Flash Point:154F
Extinguishing Media:FOAM, DRY CHEMICAL OR CO2
Fire Fighting Procedures:USE AIR-SUPPLIED RESCUE EQUIPMENT FOR ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:DON'T PRESSURIZE, CUT, HEAT, WELD OR
EXPOSE SUCH CONTAINERS TO FLAME.
Accidental Release
Spill Release Procedures:USE FOAM TO CONTROL VAPORS. FLUSH AREA W/WATER
SPARINGLY OR USE ABSORBANTS TO CONTAIN & REMOVE SPILL. NEUTRALIZE
W/AMMONIA OR COMPLEX W/SODIUM SULFITE.
Neutralizing Agent:AMMONIA OR COMPLEX W/SODIUM SULFITE.
Handling
Handling and Storage Precautions:AVOID CONTACT W/SKIN. STORE IN CLOSED
CONTAINERS & CORROSIVE.
Exposure Controls
Respiratory Protection:FULL-FACE NIOSH APPROVED FORMALDEHYDE OR ACID
GAS CARTRIDGE.
Ventilation:LOCAL EXHAUST: RECOMMENDED
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:USE IMPERVIOUS BODY COVERING & BOOTS
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:392F
Vapor Pres:1.0
Vapor Density:NIL
Spec Gravity:1.058
pH:4.05
Evaporation Rate & Reference:(BU AC = 1): 0.3
Solubility in Water:MISCIBLE
Appearance and Odor:BROWN COLORED LIQUID W/PUNGENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
CAUSTICS, STRONG ALKALIES, ISOCYANATES, ANHYDRIDES & INORGANIC ACIDS.
Stability Condition to Avoid:FLAME, HIGH TEMPERATURE, HEAT
Hazardous Decomposition Products:CO, FORMALDEHYDE GAS
Disposal
Waste Disposal Methods:INCINERATION, BIOLOGICAL OXIDATION W/PROPER
ACCLINATION OF SYSTEM, LANDFILL ONLY IF SOLIDIFIED PRIOR TO
DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.