BJDHH - DYNA-BOND UNIVERSAL ADHESIVE, QUICK SET
- MSDS: BJDHH
- Manufacturer: UNITEK CORP
- Product Name: DYNA-BOND UNIVERSAL ADHESIVE, QUICK SET
- National Stock Number: 6520-00F011196
Product Identification
Product ID:DYNA-BOND UNIVERSAL ADHESIVE, QUICK SET
MSDS Date:02/01/1988
FSC:6520
NIIN:00F011196
MSDS Number: BJDHH
Responsible Party
MONROVIA, CA 91016
Emergency Phone: (818) 574-4000
Info Phone: (818) 574-4000
Cage: 90444
Contractor
Telephone: (213) 445-7960
Cage: 90444
Ingredients
BISPHENOL A GLYCIDYLMETHACRYLATE, BIS-GMA
CAS: 1565-94-2
RTECS: UD3438000
TRIETHYLENE GLYCOL DIMETHACRYLATE
CAS: 109-16-0
RTECS: OZ4100000
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: REDNESS & MINOR IRRITATION. SKIN:
PROLONGED/REPEATED CONTACT TO UNPOLYMERIZED MATERIAL MAY CAUSE
IRRITATION & ALLERGIC SENSITIZATION. INGESTION: THIS MATERIAL MAY
BE A SLIGHT HEALTH HAZARD.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: PROLONGED/REPEATED CONTACT TO
UNPOLYMERIZED MATERIAL MAY CAUSE IRRITATION & ALLERGIC
SENSITIZATION. EYES: MAY CAUSE MINOR IRRITATION. INGESTION: THIS
MATERIAL MAY BE A SLIGHT HEALTH HAZARD.
Medical Cond Aggravated by Exposure:ALLERGIC SENSITIZATION
First Aid
First Aid:EYE: WASH W/LARGE QUANTITIES OF LUKEWARM WATER FOR 15
MINUTES. CONTACT PHYSICIAN. SKIN: WASH W/SOAP & WATER THEN FLUSH
W/LUKEWARM WATER FOR 15 MINUTES. INGESTION: CONSULT PHYSICIAN.
Fire Fighting
Flash Point:>240F
Extinguishing Media:DRY CHEMICAL, CO2, FOAM
Unusual Fire/Explosion Hazard:LARGE CONTAINERS OF BULK MATERIAL MAY
RUPTURE EXPLOSIVELY WHEN EXPOSED TO HEAT. SEALED CONTAINERS MAY
RUPTURE EXPLOSIVELY.
Accidental Release
Spill Release Procedures:CLEAN UP SMALL SPILLS W/PAPER TOWELS.
Handling
Handling and Storage Precautions:STORE IN A COOL <75F, DARK PLACE.
Exposure Controls
Respiratory Protection:GENERALLY NOT REQUIRED UNDER NORMAL CONDITIONS
OF USE.
Ventilation:GENERAL AREA VENTILATION
Eye Protection:AS NECESSARY TO PREVENT EXCESSIVE
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.34
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:SLIGHT
Appearance and Odor:VISCOUS TRANSLUCENT PASTE, MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, DIRECT SUNLIGHT, OPEN FLAMES &
STORAGE >100F.
Hazardous Decomposition Products:TOXIC GASES
Disposal
Waste Disposal Methods:UNIVERSAL & BASE ADHESIVE & CATALYST ADHESIVE
SHOULD BE MIXED & ALLOWED TO GEL & CURE. USE PROPER LANDFILL
DISPOSAL OR INCINERATION. DISPOSE OF IN ACCORDANCE WITH LOCAL,
STATE, & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.