Product ID:FLEXFRAM 605 PART B
MSDS Date:04/11/1991
FSC:8030
NIIN:00-097-9088
Kit Part:Y
MSDS Number: BJDMT

FIBER MATERIALS, INC.

5 MORIN STREET
BIDDEFORD, ME 04005
US

Emergency Phone: 207-282-5911; 207-283-5160

Info Phone: 207-282-5911

Cage: KO060

FIBER MATERIALS, INC.

BIDDEFORD, ME 04005 US

Telephone: 207-282-5911

Cage: KO060

SILICON DIOXIDE, AMORPHOUS; (SILICA, AMORPHOUS)

CAS: 7631-86-9

Fraction By Weight: 2.3%

OSHA PEL 80 MG/M3 (MFR)

ACGIH TLV: 5 MPPCF (RESP) (MFR)

EPOXY RESIN (DIGLYCIDYL ETHER OF BIS PHENOL A)

CAS: 25085-99-8

Fraction By Weight: 53.4%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:REMOVAL OF CURED MATERIAL BY GRINDING
MAY RESULT IN SUSPENDING SILICA DUST, CARBON FIBERS, AND NUISANCE
DUSTS IN THE AIR. INHALATION OF EPOXY RESINS MAY BE IRRITATING AND
SENSITIZERS. HOWEVER, RESIN I S NOT VOLATILE AND GENERALLY DOES NOT
PRESENT SERIOUS HAZARD BY INHALATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:PRIMARY IRRITATION OF SKIN ON PROLONGED
CONTACT. IRRITATING TO THE EYES.
Medical Cond Aggravated by Exposure:ALLERGIES AND/OR OTHER RESPIRATORY
CONDITIONS.

First Aid:INHAL: REMOVE TO FRESH AIR, GET MD. EYE: FLUSH THOROUGHLY
W/WATER 15 MIN. SKIN: WASH W/SOAP AND WATER. INGEST: INDUCE
VOMITING AND GET MD IMMEDIATELY.

Flash Point Method:COC
Flash Point:315F,157C
Extinguishing Media:WATER SPRAY, CO*2, DRY CHEMICAL
Fire Fighting Procedures:FOR LARGE FIRES, USE WATER SPRAY, FOG, OR
FOAM. DIKE WATER RUN-OFF. PREVENT ENTRY INTO SEWERS OR NATURAL
WATERS. WEAR FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:TOXIC FUMES WILL BE EVOLVED IF UNMIXED
MATERIAL IS INVOLVED IN A FIRE. WEAR SCBA.

Spill Release Procedures:DIKE. NIOSH APPROVED RESP PROT AND OTHER PROT
EQUIP AS NECESSARY TO PREVENT SKIN & EYE CONTACT. IF WARM, PUMP
INTO SALVAGE DRUM. SOAK UP RESIDUE & SML SPILLS W/ABSORBENT MAT
SUCH AS CLAY & PUT IN TIGH T CONTAINER. IF USE SOLVNT, WATCH FIRE
HAZARDS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN TIGHT, STURDY CONTAINERS.
HANDLE I/A/W HAZARD POTENTIAL.
Other Precautions:REMOVE CONTAMINATED CLOTHING & PROTECTIVE GEAR.
DECONTAMINATE. DESTROY LEATHER ARTICLES, INCLUDING SHOES THAT
CANNOT BE DECON. ANSI CLASSIFICATION 2. REMOVAL OF CURED MATERIAL
SHOULD BE ACCOMPLISHED W /NIOSH APPROVED RESPIRATORS.

Respiratory Protection:NIOSH APPROVED RESP W/ORGANIC VAPOR CARTRIDGE.
N/A WITH LOCAL EXHAUST.
Ventilation:LOCAL: IN MIXING & APPL. AREA. MECH: RECOMMENDED. SPECIAL:
REMOVAL OF CURED W/NIOSH APPROVED DUST RESP.
Protective Gloves:RUBBER GLOVES TO PREVENT SKIN CONTACT.
Eye Protection:CHEM WORK GOGG/FULL LGTH FCSHLD.
Other Protective Equipment:AS NECESSARY TO PREVENT BODY CONTACT.
Work Hygienic Practices:AVOID SMOKING, EATING, AND DRINKING IN THE WORK
AREA.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:600F,316C
Vapor Pres:.01 @ 70F
Vapor Density:9
Spec Gravity:1.503 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY VISCOUS LIQUID, MILD AROMATIC ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:REACTS WITH CONSIDERABLE HEAT WITH HOT
RESINS.
Hazardous Decomposition Products:CO*2, ALDEHYDES, ACIDS, N0*2, SO*2

Waste Disposal Methods:DISPOSE OF I/A/W FED, STATE AND LOCAL REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.