Product ID:FLEXFRAM 605TH
MSDS Date:08/27/1990
FSC:8030
NIIN:00-097-9088
Kit Part:Y
MSDS Number: BJDMV

Emergency Phone: 207-282-5911

Info Phone: 207-282-5911

Cage: KO060

Telephone: 207-282-5911

Cage: KO060

TETA (TRIETHYLENETETRAMINE 70%)

Fraction By Weight: 7.0%

SILICA, AMORPHOUS

OSHA PEL 20 MPPCF

ACGIH TLV: 5 MPPCF (RESPIRABLE)

LD50 LC50 Mixture:TETALD50(RAB)=800MG/KG;ORALLD50(RAT)4340
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN BURNS, ALLERGIC SKIN
REACTIONS. INGESTION MAY CAUSE BURNS OF MOUTH AND THROAT. MAY CAUSE
RESPIRATORY SENSITIZATION IN SUSCEPTIBLE INDIVIDUALS OR THROAT
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:PRIMARY IRRITATION OF SKIN ON PROLONGED
CONTACT. IRRITATING TO THE EYES. MAY CAUSE SEVERE IRRITATION WITH
CORNEAL INJURY, EVEN BLINDNESS.
Medical Cond Aggravated by Exposure:ALLERGIES AND/OR OTHER RESPIRATORY
CONDITIONS.

First Aid:REMOVE TO FRESH AIR, GET MD. EYE: FLUSH THOROUGHLY W/WATER 30
MIN. GET MD IMMEDIATELY. SKIN: WASH W/SOAP AND WATER. INGEST:
INDUCE VOMITING AND GET MD IMMEDIATELY.

Flash Point Method:COC
Flash Point:315F,157C
Extinguishing Media:CO*2, DRY CHEMICAL
Fire Fighting Procedures:FOR LARGE FIRES, USE WATER SPRAY, FOG, OR
FOAM. DIKE WATER RUN-OFF. PREVENT ENTRY INTO SEWERS OR NATURAL
WATERS. WEAR FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:TOXIC FUMES WILL BE EVOLVED IF UNMIXED
MATERIAL IS INVOLVED IN A FIRE. WEAR SCBA.

Spill Release Procedures:DIKE. NIOSH APPROVED RESP PROT AND OTHER PROT
EQUIP AS NECESSARY TO PREVENT SKIN & EYE CONTACT. PUMP OR SHOVEL
INTO SALVAGE DRUM. SOAK UP RESIDUE & SML SPILLS W/ABSORBENT MAT
SUCH AS CLAY & PUT IN TIG HT CONTAINER. IF USE SOLVNT, WATCH
FIREHAZARDS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN TIGHT, STURDY CONTAINERS.
HANDLE I/A/W HAZARD POTENTIAL.
Other Precautions:REMOVE CONTAMINATED CLOTHING & PROTECTIVE GEAR.
DECONTAMINATE. DESTROY LEATHER ARTICLES, INCLUDING SHOES THAT
CANNOT BE DECON. ANSI CLASSIFICATION 2. REMOVAL OF CURED MATERIAL
SHOULD BE ACCOMPLISHED W /NIOSH APPROVED RESPIRATORS.

Respiratory Protection:NIOSH APPROVED RESP W/ORGANIC VAPOR CARTRIDGE AS
REQUIRED TO PREVENT VAPOR.
Ventilation:LOCAL: IN CONFINED MIXING & APPL. AREAS. MECH: REQUIRED TO
PREVENT OVEREXPOSURE.
Protective Gloves:RUBBER GLOVES TO PREVENT SKIN CONTACT.
Eye Protection:GOGGLES & FACE SHIELD .
Other Protective Equipment:AS NECESSARY TO PREVENT BODY CONTACT.
Work Hygienic Practices:AVOID SMOKING, EATING, AND DRINKING IN THE WORK
AREA.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:600F,316C
Vapor Pres:.01 @ 70F
Vapor Density:9
Spec Gravity:1.201
Solubility in Water:SLIGHT
Appearance and Odor:BLACK VISCOUS LIQUID, MERCAPTAN ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:REACTS WITH CONSIDERABLE HEAT WITH HOT
RESINS.
Hazardous Decomposition Products:CO*2, ALDEHYDES, ACIDS, N0*2, SO*2

Waste Disposal Methods:DISPOSE OF I/A/W FED, STATE AND LOCAL REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.