Product ID:ADHESIVE CYANOACRYLATE TB 1743
MSDS Date:05/15/1990
FSC:8040
NIIN:01-024-6988
MSDS Number: BKBFR

THREE BOND OF AMERICA, INC.

20815 HIGGINS CT
TORRANCE, CA 90501
US

Emergency Phone: 213-320-3342

Info Phone: 213-320-3342

Preparer: KAZ KISHITA

Cage: 60859

THREE BOND OF AMERICA,INC.

TORRANCE, CA 90501 US

Telephone: 310-320-3342

Cage: 60859

2-ETHYLCYANOACRYLATE

CAS: 7085-85-0

Fraction By Weight: 95-98%

ACGIH TLV: 4PPM FOR EYE IRRIT

POLYMETHYLMETHACRYLATE

CAS: 9011-14-7

RTECS: TR0400000

Fraction By Weight: 2-5%

OSHA PEL NONE

ACGIH TLV: NONE

Health Hazards Acute and Chronic:EYE IRRITATION, BONDS SKIN INSTANTLY.
Effects of Overexposure:EYE IRRITATION, BONDS SKIN INSTANTLY

First Aid:IN CASE OF EYE CONTACT: HOLD EYELIDS OPEN & FLUSH WITH WATER
FOR MORE THAN 15 MINUTES, SEE DOCTOR AT ONCE. IN CASE OF SKIN
CONTACT: DO NOT USE FORCE TO PULL APART. USE GLUE REMOVER, POLISH
REMOVER OR ACETONE.

Flash Point Method:COC
Flash Point:181F,83C
Autoignition Temp:Autoignition Temp Text:914F
Extinguishing Media:ALCOHOL FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:WATER MAY INTENSIFY POLYMERIZATION OF THE
LIQUID

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. EVACUATE
THE AREA, WEAR PROTECTIVE EQUIPMENT. STOP LEAK IF POSSIBLE. RECOVER
AS MUCH MATERIAL PRACTICAL. SCOOP UP REMAINDER.
Neutralizing Agent:VINEGAR TO PREVENT POLYMERIZATION THEN ABSORB WITH
ABSORBENT

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHILE NOT IN
USE. STORE IN COOL & DRY AREA WHERE THERE IS NO DIRECT SUN.
Other Precautions:DO NOT POUR OR CHANGE TO ANOTHER CONTAINER, MAY
RESULT IN SHORT SHELF LIFE. DO NOT SPILL. LIQUID WILL REACT WITH
ABSORBENT & BOND WITH OTHERS.

Respiratory Protection:NONE SPECIAL. IF TLV EXCEEDED, WEAR OSHA/MSHA
APPROVED RESPIRATOR
Ventilation:MECHANICAL & LOCAL EXHAUST ARE RECOMMENDED
Protective Gloves:POLYETHYLENE GLOVES
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING
Supplemental Safety and Health

Boiling Pt:B.P. Text:>150@6MMHG
Melt/Freeze Pt:M.P/F.P Text:-40F,-40C
Decomp Temp:Decomp Text:500F,260C
Vapor Pres:2 @ 133F
Vapor Density:HEAVIER
Spec Gravity:1.04
pH:6 TO 7
Viscosity:80 TO 120 CPS
Evaporation Rate & Reference:VERY SLOW
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID, PUNGENT ODOR.
Percent Volatiles by Volume:NIL
Corrosion Rate:NEG

Stability Indicator/Materials to Avoid:YES
ACID, BASE, WATER, ALCOHOLS
Stability Condition to Avoid:WATER, EXCESS HEAT
Hazardous Decomposition Products:ACID, CARBON MONOXIDE, CARBON DIOXIDE,
POSSIBLE CYANIDE COMPOUND
Conditions to Avoid Polymerization:WATER, BASE, ALCOHOLS, EXCESS HEAT.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE & LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.