Product ID:INSTANTBOND #112
MSDS Date:10/19/1989
FSC:8040
NIIN:01-025-0237
MSDS Number: BKBFV

Emergency Phone: 718-649-3000

Info Phone: 718-649-3000

Cage: DO346

Telephone: 718-649-3000

Cage: DO346

METHYL 2-CYANOACRYLATE

CAS: 137-05-3

RTECS: AS7000000

Fraction By Weight: >90%

OSHA PEL 2 PPM/4 STEL

ACGIH TLV: 2 PPM/4 STEL; 9192

Health Hazards Acute and Chronic:IF SKIN BONDING OCCURS, ATTEMPTS TO
FORCE SEPARATION MAY RESULT IN LOCAL MECHANICAL DAMAGE. REPEATED
SOAKING OF BONDED AREA IN WARM WATER MAY HASTEN LOOSENING OF THE
BOND.
Effects of Overexposure:EXPOSURE TO LIQUID: SKIN WILL BOND VERY RAPIDLY
TO ITSELF OR TO ALMOST ANYTHING ELSE WITH WHICH IT IS IN CONTACT.
EYES:CAN CAUSE IRRITATION. VAPOR, LACHRYMATORY EFFECTS.

First Aid:SKIN CONTACT:FLUSH IMMEDIATELY WITH WATER. CONTACT PHYSICIAN.
EYE CONTACT:IRRIGATE IMMEDIATELY & THOROUGHLY WITH WATER, HOLDING
LIDS APART. DO NOT FORCE APART IF BONDED. CONTACT PHYSICIAN.
INHALATION: REMOVE FROM EXPOSURE.

Flash Point Method:COC
Flash Point:180F,82C
Extinguishing Media:DRY CHEMICAL, CO2, WATER SPRAY IF RESULTING
POLYMERIZATION WILL NOT BE HAZARDOUS.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING TO PREVENT CONTACT WITH SKIN OR EYES.
Unusual Fire/Explosion Hazard:ADHESIVE IN ABSORBENT MATERIALS SUCH AS
CLOTHES USED TO WIPE UP SPILL MAY UNDERGO POLYMERIZATION & CAUSE AN
INCREASE IN TEMP THAT COULD RESULT IN AUTO-IGNITION.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. USE DISPOSABLE
CLOTHES TO ABSORB ADHESIVE. INCINERATE IMMEDIATELY OR STORE IN A
CLOSED METAL CONTAINER, CLOTHES CONTAINING ADHESIVE MAY UNDERGO
AUTO-IGNITION. PROTECT EYES, SKIN & CLOTHING FROM CONTACT WITH
ADHESIVE.

Handling and Storage Precautions:AVOID CONTACT W/SKIN, EYES,
CLOTHES.AVOID BREATHING VAPORS.USE W/VENT ADEQUATE TO MAINTAIN
VAPOR CONCENTRATE BELOW TLV 2PPM FOR METHYL 2 CYANOACRYLATE
Other Precautions:MATERIAL IS CLASSIFIED AS COMBUSTIBLE MATERIAL.

Respiratory Protection:A NIOSH APPROVED RESPIRATOR FOR ORGANIC VAPORS
SHOULD BE WORN IF NEEDED.
Ventilation:RECOMMENDED
Protective Gloves:USE OF POLYETHYLENE GLOVES WILL HELP
Eye Protection:SAFETY GLASSES SHOULD BE WORN
Other Protective Equipment:EYE BATH.
Supplemental Safety and Health

Boiling Pt:B.P. Text:118F,48C
Vapor Pres:<2 @ 77F
Vapor Density:3.8
Spec Gravity:1.1 @ 68F
Solubility in Water:N/K.
Appearance and Odor:CLEAR/LIGHT HAZY, NO COLOR LIQUID, PUNGENT,
UNPLEASANT ODOR. LACHRYMATORY VAPOR
Percent Volatiles by Volume:98 MAX

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A VIGOROUS REACTION
Stability Condition to Avoid:SEE HAZARDOUS POLYMERIZATION
Hazardous Decomposition Products:COMBUSTION COULD RESULT IN FORMATION
OF CO2, CO & OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:CONTAM OF LIQ W/ACIDIC OR BASIC
MAT'LS, PEROXIDES, WATER CAN RESULT IN RAPID POLYMERIZATION
W/UNCONTROLLABLE TEMP RISE

Waste Disposal Methods:INCINERATION. OBSERVE ALL FEDERAL, STATE & LOCAL
LAWS CONCERNING HEALTH & POLLUTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.