Product ID:REDUCER
MSDS Date:02/19/1991
FSC:9999
NIIN:00B160022
MSDS Number: BKBHZ

PPG INDUSTRIES, INC.

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: (304) 843-1300

Info Phone: (412) 492-5555

Cage: DO894

PPG INDUSTRIES, INC.

9 ALLISON PARK, PA 15101 US

Telephone: 412-592-5555

Cage: DO894

METHYL ETHYL KETONE

CAS: 78-93-3

Fraction By Weight: 15%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LIGHT ALIPHATIC SOLVENT NAPHTHA

CAS: 64742-89-8

Fraction By Weight: 10%

N-BUTYL ACETATE

CAS: 123-86-4

Fraction By Weight: 10%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE

CAS: 108-88-3

Fraction By Weight: 10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

XYLENE

CAS: 1330-20-7

Fraction By Weight: 10%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ETHYL 3-ETHOXYPROPIONATE

CAS: 763-69-9

Fraction By Weight: 35%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: SEVERE EYE IRRITATION AND
MODERATE SKIN IRRITATION. CHRONIC: HARMFUL OR FATAL IF SWALLOWED.
VAPOR AND SPRAY MIST BE BE HARMFUL IF INHALED. REPEATED EXPOSURE TO
HIGH VAPOR CONCENTRATIONS MAY CAU SE IRRITATION OF THE RESPIRATORY
SYSTEMAND PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINESS AND
LOSS OF COORDINATION ARE INDICATIONS THAT SOLVENT LEVELS ARE TOO
HIGH. REDNESS, ITCHING, BURNING SENSATION AND VISUAL DISTURBANCES
MAY INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING, BURNING,
REDNESS AND SWELLING ARE CONDITIONS ASSOCIATED WITH EXCESSIVE SKIN
CONTACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGESTION: GIVE 1 OR 2 GLASSES OF WATER, DO NOT INDUCE
VOMITING. EYES: FLUSH EYES IMMEDIATELY WITH PLENTY OF WATER FOR AT
LEAST 15 MINUTES. SKIN: FLUSH IMMEDIATELY WITH PLENTY OF WATER &
FOLLOW WITH S OAP AND WATER. INHALATION: REMOVE TO FRESH AIR. APPLY
ARTIFICIAL RESPIRATION AND OTHER SUPPORTIVE MEASURES AS REQUIRED.

Flash Point Method:PMCC
Flash Point:40.0F,4.4C
Lower Limits:1.5
Extinguishing Media:USE NFPA CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY
CHEMICAL, OR UNIVERSAL AQUEOUS FILM FORMING FOAM).
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE BUT USED TO
COOL CONTAINERS TO PREVENT PRESSURE BUILD-UP AND POSSIBLE
AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS AND OPEN FLAMES. CLOSED CONTAINERS MAY EXPLODE. TOXIC GASES
MAY FORM WHEN PRODUCT IS CONTACTED BY FLAME OR HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED WITH PROPE RESPIRATORY, SKIN AND EYE PROTECTION SHOULD BE
PERMITTED IN THE AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP
SPILLED MATERIAL WITH SAWD UST, VERMICULITE, OR OTHER ABSORBENT
MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IB FLAMMABLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES.

Respiratory Protection:VAPOR EXHAUST OR FRESH AIR ENTRY. NIOSH/MSHA
APPROVED PAINT SPRAY OR AIR SUPPLIED RESPIRATORS MAY ALSO REDUCE
EXPOSURE. READ INSTRUCTIONS AND LITERATURE CAREFULLY ON HOW IT IS
TO BE PROPERLY FILTERED.
Ventilation:GENERAL DILUTOIN OR LOCAL EXHAUST VENTILATION TO KEEP THE
CONCENTRATION BELOW THE LOWEST SUGGESTED EXPOSURE LIMIT.
Protective Gloves:NITRILE/NEOPRENE RUBBER, POLYVINYL.
Eye Protection:SPLASH GOGGLES OR FULL FACE SHIELD.
Other Protective Equipment:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Work Hygienic Practices:STANDARD PERSONAL HYGIENE.
Supplemental Safety and Health
IF ANY OF THE FOLLOWING OCCUR DURING OR FOLLOWING USE OF THIS PRODUCT,
CONTACT A POISON CONTROL CENTER, EMERGENCY ROOM OR PHYSICIAN
IMMEDIATELY (HAVE MSDS SHEET AVAILABLE); INGESTION, EXCESSIVE
EXPOSU RE TO A CORROSIVE MATERIAL, PERSISTENT SKIN/EYE IRRITATION
OR BREATHING DIFFICULTIES.

HCC:F3
Boiling Pt:B.P. Text:172F,78C
Vapor Pres:18.9MMHG
Spec Gravity:.88
Evaporation Rate & Reference:156
Solubility in Water:4.1%
Appearance and Odor:NON-VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN SECTION 2
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:MAY PRODUCT HAZARDOUS DECOMPOSITION
PRODUCTS WHEN HEATED, INCLUDING: CARBON MONOXIDE
Conditions to Avoid Polymerization:EXTREME HEAT, OPEN FLAMES, AND OTHER
POSSIBLE SOURCES OF IGNITION.

Waste Disposal Methods:MUST BE DISPOSED IN ACCORDANCE WITH FEDERAL,
STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMENT FACI ITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.