Product ID:SCOTCH-WELD AF-126-2 STRUCTURAL ADHESIVE FILM
MSDS Date:09/14/1992
FSC:8040
NIIN:01-209-6296
MSDS Number: BKBNR

MINNESOTA MINING & MFG CO ADHESIVES & SEALERS DIV.

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-5454/612-733-1110

Info Phone: 612-733-5454

Preparer: 10-2478-5)

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

PROPRIETARY INGREDIENT--REACTION PRODUCT OF SYNTHETIC

Fraction By Weight: 60-100%

DICYANDIAMIDE

CAS: 461-58-5

RTECS: ME9950000

Fraction By Weight: 3-7%

PARA-CHLOROPHENOL-DIMETHYLUREA

CAS: 150-68-5

RTECS: YS6300000

Fraction By Weight: 1-5%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE: POSSIBLE IRRITATION. VAPORS OF
HEATED FILM & DUST FROM ADHESIVE MAY CAUSE EYE IRRITATION. SKIN:
PROLONG/REPEAT CONTACT MAY CAUSE IRRITATION & ALLERGIC REACTION.
INHALE: VAPORS OF HEATED PRODUCT M AY CAUSE IRRITATION. DUST FROM
PRODUCT:IRRITATION TO RESPIRATORY TRACT. INGEST: MAY CAUSE
DIGESTIVE SYSTEM IRRITATION.
Explanation of Carcinogenicity:PER MSDS:PARA-CHLOROPHENYL-DIMETHYLUREA
IS NOT CLASSIFIABLE AS TO ITS CARCINOGENICITY TO HUMANS (IARC GROUP
3).
Effects of Overexposure:EYE:REDNESS, SWELLING, PAIN, TEARING.
SKIN:REDNESS, SWELLING, BLISTERING, ITCHING. INHAL:RESP SYS
IRRITATION. INGEST:PAIN, VOMITING, ABDOMINAL TENDERNESS, NAUSEA,
BLOOD IN VOMITUS, BLOOD IN FECES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MFG.

First Aid:EYE:IMMED FLUSH W/LG AMTS OF WATER. GET IMMED MED ATTN.
SKIN:FLUSH SKIN W/LG AMTS OF WATER. IF IRRIT PERSISTS GET MED ATTN.
INHAL:IF SIGNS/SYMPTOMS OCCUR REMOVE TO FRESH AIR. IF CONTINUE CALL
PHYSICIA N. INGEST:DO NOT INDUCE VOMITING. DRINK2 GLASSES OF WATER.
CALL PHYSICIAN.

Extinguishing Media:WATER, CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING INCLUDING
HELMET,SELFCONTAINED + PRESSURE OR PRESSURE DEMAND BREATHING
APPARATUS,BUNKER COAT,PANTS,BANDS AROUND ARMS/WAIST/LEGS,
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Spill Release Procedures:NOT APPLICABLE. SOLID FILM.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:STORE AT TEMPS WHICH ARE BELOW 32F
(OC). ALLOW MATERIAL TO RETURN TO ROOM TEMP BEFORE USE. KEEP OUT OF
REACH OF CHILDREN.
Other Precautions:AVOID SKIN CONTACT. ABOID INHAL OF VAPORS CREATED
DURING CURE CYCLE. AVOID INHAL OF DUST CREATED BY CUT/SNAD/GRIND.
DO NOT EAT, DRINK OR SMOKE WHEN USING PRODUCT. WASH EXOSED AREAS
THOROUGHLY W/SOAP & WATER. AVOID EYE CONTACT.

Respiratory Protection:SELECT ONE OF FOLLOWING NIOSH APPROVED RESP
BASED ON AIRBORNE CONCENTRATION OF CONTAMINANTS & IN ACCORDANCE
W/OSHA REGS:HALF-MASK DUST RESP.USE WATER AS A LUBRICANT ON
MACHINING TOOLS TO ELIMINATE DUS T & IMPROVE MACHINABILITY OF CURED
PARTS
Ventilation:USE/PROVID W/APPROPRIATE LOC EXHAU VENTI FOR GRIND/CUT/SAND
CURED MATRL.CURING OVENS MUST BE EXHAUSTED (SUPPLEMENTAL)
Protective Gloves:POLYETHYLENE/ETHYLENE VINYL ALCOHOL, PVA
Eye Protection:VENTED GOG,SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:NONE SPECIFIED BY MFG.
Work Hygienic Practices:PRACTICE GOOD HYGEINE PRACTICE.
Supplemental Safety and Health
FIRE PROTECTION:FACE MASK, & PROTECTIVE COVERING FOR EXPOSED AREAS OF
HEAD. VENTIL:OUTDOORS OR TO SUITABLE EMISSION CONTROL DEVICE. IF
EXHAUST VENTI IS NOT ADEQUATE USE APPROPRIATE RESP PROTECTION.

HCC:N1
Solubility in Water:NOT SOLUBLE
Appearance and Odor:FILM ON WHITE LINER, GRAY, ESSENTIALLY NO ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MFG.
Stability Condition to Avoid:HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.

Waste Disposal Methods:INCINERATE UNCURED WSTE IN INDUSTRIAL OR
COMMERCIAL INCINERATOR. DISOSE OF COMPLETELY CURED (OR POLYMERIZED)
MATERIAL IN SANITARY LANDFILL. EPA HAZ WASTE NO:NONE. SINCE
REGULATIONS VARY CONSULT APPLIC ABLE REGS OR AUTHORITIES BEFORE
DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.