BKBZW - #5751 TONNING OIL
- MSDS: BKBZW
- Manufacturer: KESTER SOLDER DIV LITTON SYSTEMS INC
- Product Name: #5751 TONNING OIL
- National Stock Number: 3439-01-178-4759
Product Identification
Product ID:#5751 TONNING OIL
MSDS Date:12/12/1988
FSC:3439
NIIN:01-178-4759
MSDS Number: BKBZW
Responsible Party
DES PLAINES, IL 60018-2675
US
Emergency Phone: 708-297-1600
Info Phone: 708-297-1600
Cage: 75297
Contractor
Telephone: 847-297-1600
Cage: 75297
Ingredients
NON HAZARDOUS INGREDIENTS
Fraction By Weight: 100% %
Hazards
LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:AT TEMPERATURES EXCEEDING 200C,
DECOMPOSITION CAN YIELD ACIDS WHICH MAY IRRITATE EYES, NOSE, THROAT
AND CAUSE NAUSEA WHEN INHALED. VAPORS MAY CAUSE PULMONARY
IRRITATION AND LUNG DAMAGE.
Explanation of Carcinogenicity:PRODUCT CONTAINS NO MATERIALS CURRENTLY
CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA.
Effects of Overexposure:EYE/NOSE/THROAT IRRITATION, NAUSEA
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:IN CASE OF EYE CONTACT, FLUSH THOROUGHLY WITH WATER. IN CASE
OF SKIN CONTACT, WASH WITH WATER. IN CASE OF INHALATION, REMOVE TO
FRESH AIR. GET MEDICAL ATTENTION. IN CASE OF INGESTION, GIVE PLENTY
OF W ATER. CALL A PHYSICIAN.
Fire Fighting
Flash Point Method:COC
Flash Point:570F,299C
Autoignition Temp:Autoignition Temp Text:760F
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER. NOTE:
FIREPOINT - 610F
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:FLUSH AWAY WITH WATER OR ABSORB INTO ABSORBENT
MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:AS REQUIRED TO AVOID BREATHING VAPORS
Ventilation:LOCAL EXHAUST TO REMOVE SMOKE AND FUMES. MECHANICAL
(GENERAL) RECOMMENDED.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NONE
Vapor Pres:< 1
Spec Gravity:1.06
Evaporation Rate & Reference:< 1 (CCL2 = 1)
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT COLORED VISCOUS LIQUID
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:ACID FUMES AT TEMPERATURES ABOVE 200C
Disposal
Waste Disposal Methods:ACCORDING TO LOCAL REGULATIONS, USUALLY BY
PYROLYSIS. AFTER USE ON MOLTEN SOLDER, OIL MAY CONTAIN LEAD.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.